- Description
Details
I SERIES Modular Vertical Array 600 is a scalable, adaptive sound reinforcement system featuring multiple vertically arrayable elements designed to be used in combination or separately, and with or without splay between elements, providing an extensive range of vertical coverage angle and throw distance configurations.
The IV6-118S is a high power 1 x 18" compact, direct-radiating subwoofer designed to complement the full range IV6-1122 elements in any array configuration with deep, impactful low-frequency support. Large, balanced ports provide optimal enclosure tuning and even air pressure distribution to the driver cone, reducing distortion and extending system longevity. A FEA-optimized ferrite motor with long linear excursion capabilities provides deep bass response for the enclosure’s size. With 800W @ 8 Ohms of continuous power handling (80V), the IV6-118S subwoofer can be conveniently driven by the same size power amplifier as the IV6-1122 full-range array elements.
The subwoofer can be ground-stacked or suspended at the top of, or behind, a flown array. Cardioid subwoofer tunings are easily deployed using the IV6-SB-AF (Sub Behind Array Frame) and can be integrated into a single full-range array or flown separately. The IV6-118S is fully compatible with all of the available accessory array frames in the series, presenting virtually limitless options for integration in any application
- Features
Features
- Long excursion ferrite LF driver with FEA-optimized motor and symmetric movement suspension
- Matched-size enclosure and aligned suspension point for seamless flown array integration
- 800W continuous power handling (3200W peak)
- High sensitivity design minimizes power compression losses and required amplifier size
- Indoor and Outdoor (weather-resistant) models available
- Specification
Operating Range 37 Hz to 132 Hz Transducers 1 x 18" (457mm) double-treated cone with 4" (102mm) inner/outer wound voice coil, ferrite construction Continuous Power Handling 80V, 800W @ 8 ohms (3200W peak) Input Connection (1) Screw terminal block (2x 2-position), (2) NL4 Connectors Mounting Points (8) M10 threaded rigging points (4 per side)
(4) User-installed rubber feet (for ground stack applications)Dimensions (H x W x D) 20" (508 mm) x 28.12" (714 mm) x 28.08" (713 mm) Weight 132.6 lbs (60.1 kg) loudspeaker and 1 pair of splay brackets - Documents
Documents
- Reviews
Write Your Own Review