- Description
Details
NEXO ELS18-PW 18-Inch Installation White Subwoofer
The ELS18-PW is a powerful installation-dedicated subwoofer engineered to extend system performance with deep, controlled low frequencies down to 32 Hz. Using a high-excursion 18" woofer in a bass-reflex enclosure, the ELS18-PW delivers NEXO's renowned size-to-power ratio in a compact, discreet white cabinet that integrates seamlessly into architectural environments.
Designed as the ideal companion for the EPS10 and EPS12 installation speakers, the ELS18-PW shares the same aesthetic proportions, allowing stacked or flown combinations that form a compact, wideband system with exceptional impact and phase coherence. When powered by NXAMPmk2 amplifiers, systems benefit from NEXO's advanced processing for precise control, consistency, and musical accuracy.
Built specifically for fixed installations, the ELS18-PW features a robust 15 mm birch plywood enclosure with a durable polyurethane coating, a Magnelis steel grille with fire- and UV-resistant white acoustic cloth, and IP55 protection when used with the supplied connector cover. Multiple M10 rigging points and a comprehensive accessory range provide maximum flexibility for flown or ground-stacked deployment in a wide variety of permanent applications.
- Features
Features
- 18" high-excursion installation subwoofer
- Designed for EPS10 and EPS12 loudspeaker systems
- Deep bass extension down to 32 Hz
- Clean white enclosure for architectural integration
- Compact, high-density bass-reflex design
- Solid 15 mm birch plywood construction
- IP55-rated with included connector protection cover
- Stackable or flyable with multiple M10 rigging points
- Phase-aligned with other NEXO loudspeakers
- Optimized for use with NXAMPmk2 amplifiers
- Specification
Frequency Response @-6 dB 32 Hz to 150 Hz Sensitivity 1W @ 1m 106 dB SPL Nominal Peak SPL @ 1m 138 dB Crossover Frequency 32-85 Hz, 32-120 Hz, 32-150 Hz Nominal Impedance 8Ω Recommended Power 1100 to 1750 Watts / 8 Ohms Component 1 x 18" 8 Ohms long excursion Connectors 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) Compatible Cables Section Cables from 0.75 mm to 3.31 mm (AWG 18 to 12) copper section Compatible Cables Outside Diameter Cable with maximum outside diameter of 11 mm Rigging Points 4 x pairs of M10 rigging points (two on each side) Material 15 mm baltic birch plywood body and Magnelis grill Finish White structural paint Front Finish UV & Fire resistant acoustic fabric Operating Temperature Range 0°C - 40°C (32°F - 104°F) Storage Temperature Range -20°C - 60°C (-4°F - 140°F) IP Rating IP55 Dimensions (H x W x D) 20.9" (531 mm) x 23.6" (600 mm) x 26.4" (671 mm) Weight 91 lbs (41 kg) - Documents
Documents
- Reviews
Write Your Own Review


