- Description
Details
NEXO ELS600-PW 15-Inch Installation White Subwoofer
The ELS600-PW is a powerful installation-dedicated subwoofer engineered to provide deep, controlled low frequencies down to 40 Hz. Featuring a high-excursion 15" driver in a bass-reflex enclosure, the ELS600-PW combines NEXO's renowned size-to-power ratio with a clean white design, ideal for architectural and fixed-installation environments.
Designed as the perfect low-frequency companion for EPS8 and EPS10 installation speakers, the ELS600-PW shares matching aesthetic proportions, allowing stacked or flown configurations that form a compact, wideband system with exceptional impact. When used with NXAMPmk2 amplifiers, systems benefit from precise phase alignment, advanced NEXO processing, and seamless integration with other NEXO point-source products.
Built specifically for permanent installations, the ELS600-PW features a robust 15 mm birch plywood enclosure with polyurethane coating, a Magnelis steel grille with UV- and fire-resistant white acoustic cloth, and IP55 protection with the included connector cover. Multiple M10 rigging points and a full range of accessories provide maximum flexibility for flown or ground-stacked deployment, ensuring long-term reliability in a wide variety of indoor and outdoor applications.
- Features
Features
- 15" high-excursion installation subwoofer
- Designed for EPS8 and EPS10 loudspeaker systems
- Deep bass extension down to 40 Hz
- Compact design, can be stacked or flown with companion speakers
- Discreet white finish for architectural integration
- Solid 15 mm birch plywood construction
- IP55-rated with included connector cover
- Multiple M10 rigging points for flexible installation
- Phase-aligned with other NEXO speakers for seamless integration
- Optimized for use with NXAMPmk2 amplifiers
- Specification
Frequency Response @-6 dB 40 Hz to 150 Hz Sensitivity 1W @ 1m 105 dB SPL Nominal Peak SPL @ 1m 136 dB Crossover Frequency 40-85 Hz, 40-120 Hz, 40-150 Hz Nominal Impedance 4Ω Recommended Power 850 to 1350 Watts/4 Ohms Component 1 x 15" 4 Ohms long excursion Connectors 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) Compatible Cables Section Cables from 0.75 mm to 3.31 mm (AWG 18 to 12) copper section Compatible Cables Outside Diameter Cable with maximum outside diameter of 11 mm Rigging Points 4 x pairs of M10 rigging points (two on each side) Material 15 mm baltic birch plywood body and Magnelis grill Finish White structural paint Front Finish UV & Fire resistant acoustic fabric Operating Temperature Range 0°C - 40°C (32°F - 104°F) Storage Temperature Range -20°C - 60°C (-4°F - 140°F) IP Rating IP55 Dimensions (H x W x D) 16.7" (423 mm) x 20.9" (531 mm) x 22.3" (566 mm) Weight 58 lbs (26.3 kg) - Documents
Documents
- Reviews
Write Your Own Review






