- Description
Details
The Electro-Voice EVU-2082/95 is a compact two-way loudspeaker system that can be used in a variety of applications where high quality sound reinforcement is required in an ultra-compact lightweight enclosure. The enclosure design utilizes asymmetric angles to maintain tight clearances to wall and ceilings while providing optimal coverage patterns making it ideal to blend into surroundings. This design was optimized for wall, stage lip and under balcony applications.
The EVU-2082/95 incorporates the ICT-1-8, a high-output 1.3" diaphragm titanium compression driver coupled to a Constant Directivity™ 90° x 50° rotatable waveguide. The ICT-8-16 woofer was developed using FEA optimization to provide the highest sensitivity while achieving the highest level of speech intelligibility. The cross¬over design uses 18-dB-per-octave slopes with equalization for very smooth response in the vocal range, linear off-axis response and a protection circuit for long term reliability.
The EVU series is constructed of 9-ply hardwood plywood enclosures with six integral M8 suspension points to support a wide variety of mounting positions. The EVU system is finished in textured paint, available in either white or black. Each EVU system includes a universal U-bracket to facilitate mounting. The U-bracket provides full unobstructed rotation of the loudspeaker (330° unobstructed rotation if the transformer kit is installed). Additional mounting points are located on the rear of the enclosure for use with an Omnimount™ type bracket. An available 70.7/100-V transformer kit may be easily mounted over the input panel for use in distributed systems. All of these features give you the flexibility to address a large range of venues, while quickly and precisely supporting customer requirements.- Features
Features
- Sonically matched to all EV-Innovation lines
- Sophisticated 18-dB-octave passive crossover/EQ networks
- Asymmetrical enclosure for ideal under-balcony and stage-lip aiming
- Optional Neutrik Speakon(R) connector panel
- One 1.3" (33 mm) diaphragm compression driver
- U-bracket included
- Optional 70V and 100V operation
- OmniMount(R)-compatible rear mounting points
- Available in black or white (interior use)
- Ultracompact 10 x 24 inch enclosure
- 90º x 50º rotatable waveguide
- Ultra-high power handling for size: 350W continuous
- 126 dB Max SPL
- Asymmetrical trapezoidal enclosure design
- Compatible with OmniMount™
- Specification
Frequency Response (-3 dB) 100 Hz - 16 kHz Frequency Range (-10 dB) 60 Hz - 20 kHz Rotatable Coverage 90° x 50° Rec. High-Pass Frequency 90 Hz Passive Crossover Frequency 2300 Hz Axial Sensitivity 95 dB (1 W/1 m) Max. Calculated SPL 126 dB Passive Power Handling 350W continuous, 1400W peak Impedance 8 ohms (nominal), 6.0 ohms (min.) LF Transducers Dual ICT-8-16, 8” (203 mm) drivers HF Transducer ICT-1-8, 1.3” (33 mm) diaphragm compression driver Connectors Single four-pin 12 AWG Phoenix/Euro Block screw-terminals Enclosure 9-ply hardwood plywood with textured paint Grille 18 GA steel with cloth Environmental IEC 60529 Suspension (6) M8 threaded suspension points Optional Transformer EVU-TK60, 70V transformer, 60W Dimensions (H x W x D) 9.73" (247.2 mm) x 24.23" (615.5 mm) x 9.34" (237.2 mm) Net Weight 28.3 lbs (12.8 kg) Shipping Weight 35.2 lbs (16 kg) - Documents
Documents
- Reviews
Write Your Own Review