- Description
Details
The PVXp 15 DSP features a reliable bi-amped power section that provides a total of 830W of peak available dynamic power. With that much available power, speaker protection is critical. Advanced digital signal compression prevents audible overload, protecting the speakers from harmful distortion at high output levels. This powered enclosure also includes heavy duty speaker drivers; it features a 15" woofer with a 2-3/8" voice coil and a 50 oz. magnet. This is coupled with the RX14 compression driver that includes a 1.4" titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn.
The PVXp 15 DSP provides a balanced input via a combination jack that accepts a balanced TRS 1/4" input, as well as a balanced XLR input and summed RCA jacks. There are two balanced Thru outputs, a male XLR and a 1/4" TRS. The LCD display and EQ presets, along with other operating parameters are accessed via a one-knob selector.
- Features
Features
- 2-way bi-amplified analog amp powered speaker system
- DSP I/O is at 48 kHz and 24 bits, with low-jitter, professional-grade components
- Fan cooled for maximum reliability
- Peavey Exclusive Quadratic Throat Waveguide™ technology, 100 by 50-degree coverage
- DSP processing is 64-bit double-precision
- Input is via a combo female XLR and 1/4" TRS phone jack with balanced input
- A Mic/Line switch provides for two different gain settings
- Thru output is via a male XLR jack and 1/4" TRS phone jack
- Multiple Factory Preset EQ settings
- Rugged plastic injection-molded trapezoidal enclosure
- 630 watts peak dynamic woofer power, 200 watts peak dynamic tweeter power
- Full-coverage perforated steel grille, with powder coat finish
- RX™ 14 compression driver, with 1.4 inch titanium diaphragm
- Pole mount molded-in for 1 3/8" diameter poles
- 15" heavy-duty woofer with a 2-3/8" voice coil & 50 oz. magnet
- Top, bottom and right side flying point inserts
- Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads
- Specification
Frequency Range 49 Hz to 20 kHz Frequency Response 58 Hz to 20 kHz (±3 dB) Usable Low Frequency Limit 52 Hz (-10 dB point anechoic) Nominal Sensitivity 97 dB (average) Maximum Sound Pressure Level 128 dB SPL peak with music Radiation Angle Nominal: 100° horizontal X 50° vertical (measured at -6dB point of polar response) Transducer Complement Heavy-duty 15" woofer with 2 3/8" voice coil & 50 oz. magnetRX™14 1.4" titanium diaphragm dynamic compression driver Box Tuning Frequency 57 Hz Electroacoustic Crossover Frequency 2,100 Hz Internal Power Amplifiers (@120 VAC line) Total of 830W peak available dynamic powerWoofer - 630W peak available dynamic power Continuous Power 230W @ less than 1% distortionTweeter - 200W peak available dynamic power Electronic Input Impedance (Nominal) Line: 2.2 k ohms balanced (1/4"), 10 k ohms unbalanced 1/4"Mic: 2.2 k ohms balanced (XLR) No phantom power available Input Sensitivity for Full Output (Level full CW) 0.48V RMS in the Line position0.01V RMS in the Mic position Infrasonic Filter Protection 36 dB/octave roll-of Nominal Amplifier Frequency Response +0, -3 dB from 20 Hz to 20 kHz THD and IM Typically less than 0.5 % Damping Factor Greater than 100 @ 1000 Hz, 8 Ohms Power Requirements of Peavey PVXp 15 System Nominal 120W, 100 - 240 VAC 50 - 60 Hz Front Dimensions (H x W x D) 28.25" (718 mm) x 18.90" (480 mm) x 18.71" (475 mm) Rear Dimensions (H x W x D) 26.25" (667 mm) x 10.25" (260 mm) x 18.71" (475 mm) Weight 51 lbs (23.2 kg) Shipping Weight 58 lbs (26.308 kg) - Documents
- Reviews
Write Your Own Review