- Description
Details
This woofer features neodymium magnet and ultra robust cone for extra long life. The enclosure is constructed of multiply hardwood coated in JBL’s rugged DuraFlex finish and is heavily braced to maximize low-frequency performance. The rectangular enclosure is fitted with sixteen M10 threaded attachment points and utilizes a 14-gauge steel grille internally lined with acoustically transparent foam to provide additional driver protection and give a very professional appearance. The ASB6112 is part of JBL’s AE Series, a versatile family of loudspeakers intended for a wide variety of applications.- Features
Features
- 2263H 12" Differential Drive® dual voice coil dual gap, neodymium magnet transducer
- 1000 watts continuous pink noise, 4000 watts peak power handling capacity
- Large vent area for high output with low distortion
- For ground-stacked or suspended applications in stand-alone arrays or in combination with other AE Series products
- Specification
Frequency Range (-10 dB) 35 Hz – 1 kHz Frequency Response (± 3 dB) 43 Hz – 1 kHz Transducer Power Rating 1000 W (4000 W peak), 2 hrs Long-Term System Power Rating 700 W (2800 W peak), 100 hrs Maximum SPL (1m) 40 Hz - 300 Hz: 126 dB-SPL cont avg (132 dB peak) System Sensitivity 40 Hz - 300 Hz: 96 dB-SPL,1W (2.83V) @ 1m Nominal Impedance 8 ohms Low Frequency Driver 1 x 2263H, 305 mm (12 in) dia., 75 mm (3 in) Dual Coil DualGap neodymium Differential Drive® driver Enclosure Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood Suspension Attachment 16 points (4 top, 4 bottom, 4 each side) M10 threaded hardware Finish Black DuraFlex™ finish. White available upon request Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals Input Connector Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs Input Connector Speakon in parallel with barrier strip for loop-through Environmental Specifications Mil-Std 810; IP-x3 per IEC529 Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers Dimensions (H x W x D) 16" (406mm) x 14.5" (369 mm) x 19" (483 mm) Net Weight 36 lbs (16.3 kg) - Reviews
Write Your Own Review