- Description
Details
The ASB6125 is a high power, lightweight front-loaded vented subwoofer enclosure housing two JBL 2265H-1 Differential Drive dual voice coil dual gap 15" woofers. These woofers feature neodymium magnets and ultra robust cones for extra long life.
The enclosure is constructed of multiply hardwood coated in JBL’s rugged DuraFlex™ finish and is heavily braced to maximize low-frequency performance. The rectangular enclosure is fitted with sixteen M10 threaded attachment points and utilizes a 14-gauge steel grille internally lined with acoustically transparent foam to provide additional driver protection and give a very professional appearance.
The ASB6125 is part of JBL’s AE Series, a versatile family of loudspeakers intended for a wide variety of applications.- Features
Features
- 2 x 2265H-1 15" Differential Drive® dual voice coil dual gap, neodymium magnet transducers
- 1600 watts continuous pink noise, 6400 watts peak power handling capacity
- Parallel/Discrete switchable input mode
- Large vent area for high output with low distortion
- For ground-stacked or suspended applications in stand-alone arrays or in combination with other AE Series products
- Specification
Frequency Range (-10 dB) 32 Hz - 1 kHz Frequency Response (± 3 dB) 38 Hz - 1 kHz Input Modes Drivers Parallel / Drivers Discrete Transducer Power Rating 1600 W (6400 W peak), 2 hrs Long-Term System Power Rating 1350 W (5400 W peak), 100 hrs Maximum SPL (1m) 35 Hz - 400 Hz: 132 dB-SPL cont av (138 dB peak) System Sensitivity 35 Hz - 400 Hz: 100 dB-SPL, 1W (2.0V) @ 1m Nominal Impedance 4 ohms in parallel-drive mode 2 x 8 ohms in discrete-drive mode Low Frequency Driver 2 x 2265H-1 380 mm (15 in) dia. 75 mm (3 in) Dual Coil Dual Gap neodymium Differential Drive drivers Enclosure Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood Suspension Attachment 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware Grille Powder coated 14 gauge perforated steel, with acousticallytransparent black foam backing Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier stripterminals Environmental Specifications Mil-Std 810; IP-x3 per IEC529 Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers Dimensions (H x W x D) 38" (965 mm) x 16.5" (419 mm) x 23.5" (597 mm) Net Weight 81.0 lbs (36.7 kg) - Reviews
Write Your Own Review