- Description
Details
The amplifier mounted on board is class D, delivering 2 x 1000W at 8Ω. One of the two amplifying channels is dedicated to an output Speakon to connect to many kinds of speaker configurations, including single mid-high modules (KK52, KK102), multiple line arrays or the passive version of an additional bass module (KMT18P or KMT12P).
The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol, also on an XLR for ease of cabling. An integrated touch screen provides intuitive managing and editing of powerful DSP controlling Input and output levels, internally generated test signal, In/Out routing, speakon output delay (up to 12 ms.), subwoofer delay (up to 12 ms.), overall system delay (up to 330 ms.).
All DSP functions, including EQ can be controlled with remote managing software via USB or RS485, again conveniently on a standard XLR. There are 40 different DSP presets, specifically made by K-Array to optimize the system performance of the variety of device configuration available. In addition the user can also create, save and store his/her own personal presets on the KMT18 module. The unique four-corner port configuration gives symmetrical back loading to the speaker for extended bass response with very low distortion. This also gives incredible structural strength to the cabinet despite its light weight. Pocket handles and an M20 thread mount position for attaching mid-high speakers makes the KMT18 convenient to use and ideal for medium throw applications in theaters, concert halls and Audio/Video installations.
All KTM18 components are designed by the K-Array R&D department and custom-made under the K-Array quality control system.- Features
Features
- Unique performance-to-size ratio
- Fitted with integral handles and castors
- Direct radiating, long excursion 18" driver
- Ultra fast set-up and dismantling system
- Analog and digital AES-EBU inputs
- RS485 and USB connectivity for remote control
- Specification
Acoustics Speaker Power handling 800 W (AES) Max power 1400 W Impedance 8Ω Frequency range 30Hz - 150 Hz +/- 3dB (preset dependent) SPL 1W / 1mt 99 dB Maximum SPL 130 dB continuous - 136 dB peak Coverage Omni Crossover Type DSP controlled Frequency 150 Hz (preset dependent) Transducers Full range 1 x 18” Neodymium speakers with 3” voice coil Audio Input Specifications Analog Connectors 2 male + 2 female 3-pin balanced XLR Digital Connectors 1 male + 1 female 3-pin XLR Audio powered Output Connector Female Speakon Wiring Pin1+= CH1+ Pin1= CH1- Pin2+= N.C. Pin2= N.C. Remote control Input Connectors 1 male + 1 female XLR parallel / 1 USB B Jack serial converter Power Input Specifications Connectors 2 x PowerCon IN/OUT Amplifiers Type 1 modules class D - DSP controlled Subwoofer power 1000 Watt @8Ω Speaker power output 1000 Watt @8Ω Speaker power output Dynamic limiter, over current, over temp, short circuits AC power Operating range 85 - 130 Vac 60Hz / 190 - 240 Vac 50Hz (Auto Switch) I. nom 5.5 A / 115 Vac - 2.9 A / 230 Vac Minimum operation voltage 85 Vac - 190 Vac Maximum operation voltage 130 Vac - 240 Vac Max continuos andburst current 6A(>10 sec) - 12A (<1 sec) @ 130 Vac - 240 Vac10A(>10 sec) - 20A (<1sec) @ 85 Vac - 190 Vac Physical Dimensions 46.5 x 47.5 x 61 cm (18.31”x 18.70” x 24.02”) Weight 27.6 Kg (60.85 lbs) - Reviews
Write Your Own Review