- Description
Details
Electro-Voice CPS 4.5 4-Channel (4 x 500W) Rackmount Power Amplifier
The CPS4.5 amplifier offers four independent Class-D Variable Load Drive (VLD) amplifier blocks, each one capable of delivering up to 500 Watts into Low-Z or High-Z loads. Per default, each channel can be configured individually for max. power output into either 2 Ω, 4 Ω, 70V- or 100Vnetworks without involvement of any output transformers. Being designed for professional audio installation market, special care was taken for long term cost of ownership parameters: In addition to remarkably low current consumption and heat dissipation, the CPS4.5 provides remote standby switching with just 5 Watts consumption in standby mode. An optional remote control module RCM-810 provides control and supervision features via IRIS-Net, including monitoring of amplifier status and real time load supervision. In addition, via RCM-810 the Variable Load Drive characteristics can be set for max. power output into any load between 2 Ω and 10 Ω, in steps of 0.1 Ω.
- Features
Features
- Four channels in one compact rack-efficient unit
- 500W per channel
- 70/100V operation for distributed systems
- Class-D design for optimum efficiency
- Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring
- IRIS-Net selection of each channel's impedance (2-10 Ω in 0.1 Ω steps)
- Rear-mounted attenuators
- Switchable 50 Hz high-pass filter (Hi-Z mode)
- Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current
- Phoenix-type input and output connections
- Remote power-on/off contact.
- Programmable power-on delay settings
- Front-to-rear fans
- Specification
Maximum Midband Output Power
THD = 1%, 1kHz4 x 500W/2Ω
4 x 500W/4Ω
4 x 500W/70V
4 x 500W/100VRated Output Power
THD < 0.3%, 20 Hz - 20kHz4 x 450W/2Ω
4 x 450W/4Ω
4 x 450W/70V
4 x 450W/100VMaximum Bridged Output Power
THD = 1%, 1 kHz2 x 1000W/4Ω
2 x 1000W/8Ω
2 x 1000W/140V
2 x 1000W/200VMaximum RMS Voltage Swing 100V per channel (THD = 1%, 1 kHz) Power Bandwidth Low impedance mode: 10 Hz - 25 kHz
High impedance mode: 50 Hz - 25 kHzVoltage Gain, Ref. 1 kHz 32 dB (2Ω/4Ω mode)
33 dB (70V mode)
36 dB (100V mode)THD < 0.05% (at rated output power MBW = 80 kHz, 1 kHz) IMD-SMPTE, 60 Hz, 7 kHz < 0.05% DIM30, 3.15 kHz, 15 kHz < 0.02% Maximum Input Level +21 dBu Crosstalk, Ref. 1 kHz < 80 dB (at Rated Output Power) Frequency Response, Ref. 1 kHz 15 Hz - 30 kHz (+/- 1 dB) Input Impedance, Active Balanced 20 kΩ Damping Factor, 1 kHz, 8Ω > 240 Slew Rate 28 V/us Output Noise, A-Weighted < -66 dBu Output Stage Topology Class D Power Consumption 490W (1/8 max.output power @4Ω) Power Requirements 220-240V, 50-60 Hz or 120V, 50 - 60 Hz or 100V, 50-60 Hz Protections Audio Limiters, Temperature, DC, HF Short Circuit, Peak Current Limiters, Inrush Current Limiters Cooling Front - to - rear,continously variable fans Ambient Temperature Limits +5° C - +40° C (40° F - 105°F) Safety Class I Dimensions (H x W x D) 3.46" (88 mm) x 19" (483 mm) x 16.57" (421 mm) Weight 24.6 lbs (11.1 kg) - Documents
Documents
- Reviews
Write Your Own Review