RCF XPS 16K 4-Channel 4x4000W DSP Power Amplifier

The XPS 16K is a four-channel power amplifier with advanced processing and analog/digital routing options for both touring and install use. With 4x4000 W Class D continuous power at 2.7 ohms, 40-bit floating-point processing at 96 kHz, and 32-bit internal routing, XPS 16K packs extreme power density in a 2U chassis. Designed for both touring and installed sound systems, XPS is intended for use with high-performance speakers and provides ready-touse configurations and presets. It can also be used in linear mode with advanced tuning capabilities. Each output features 4000 ms output delay (1372 m / 4501 ft), EQ Filters, Crossovers, FIR Filters, Multiband Compressor, RMS Limiter, and Thermal limiter. XPS delivers rider-friendly premium sound with full RDNet remote management, large touch interface onboard, exceptional signal/noise ratio, ultra-low distortion, and extreme dynamic range.

Installed Audio - Quality Power for Fixed Sound Systems

XPS Series is the best choice for high-power installation systems such as auditoriums, theme parks, and performance venues. Whether perfectly integrating with RCF passive speakers with ready-to-use presets, XPS provides installation-specific features, including enhanced system status monitoring, GPIOs for extended capabilities, flexible routing, and perfect integration with our proprietary RDNet management platform.

Tour Sound - Thinking Out of the Box, and Into The Rack

XPS shines when used in touring applications and live events from medium to very large capacity. Paired with RCF high-powered passive speakers, XPS gives a new perspective in sound system management. The system designer now has complete flexibility in choosing powered, or externally amplified speakers, balancing portability, weight, ease of installation, cabling, fast setup speed, and complete remote management, via RDNet.

• 16000W Total Continuous Power
• 40-bit Floating-point DSP and 32-bit routing up to 96 kHz
• Dante Audio Network
• FiRPHASE, Bass Motion Control, Bass Shaper
• RDNet Networked Management
• Touch 4.3" Color TFT Interface
• Full On-board Processing with Delay, EQ, Comp/Limiter
• RCF Speaker Presets Library
• Class-D Modules with SMPS and Advanced PFC

Spec Sheet