- Description
Details
The Roland S-2416 Stage Unit chassis houses 24 analog inputs and 16 analog outputs in an EIA rack-mount size of 4U. All input sections are equipped with discrete mic preamps that have been freshly designed to be transparent with uncolored sound. What's more, each XLR jack features three-colored lights that clearly communicate the status of phantom power, clipping, and signal presence. The use of Neutrik connectors assures ruggedness for demanding environments.
The rear panel provides AES/EBU connectivity (25-pin D-sub type) for 8 channels of input and output, enabling connection to speaker processors, amps, and other devices capable of AES/EBU input and/or output. Input via AES is assigned to channels 25 through 32 and output is selectable by a mode switch. When combined with analog input and output, the S-2416 can achieve up to 32 inputs and 24 outputs. * When using AES/EBU input/output, external syncing to a master clock is required. Use third-party AES/EBU breakout cables to make connections.
With two REAC connectors – a main and a backup – a redundant REAC network is possible. If a problem occurs with the main line, operation instantly switches to the backup with no break up or click /pop in sound. Neutrik Ethercon connectors assures both a reliability and ruggedness for any type of environment.
The S-2416 is a Digital Snake capable of a cascade connection. Switching the device to Cascade mode and connecting another Digital Snake makes it possible to expand inputs and outputs up to 40x40 channels. Supports a high bit rate of 24 bits and a high sampling rate of 96 kHz. A mode switch enables selection of 96 kHz, 48 kHz, or 44.1 kHz, when the S-2416 is switched to Clock master mode. The unit is also equipped with word-clock input and output connectors (BNC) for supplying a master clock signal when using the AES/EBU connection.- Features
Features
- 24 input x 16 output analog + 8 input x 8 output digital (AES/EBU) = total of 32 input x 24 output
- 2 REAC ports for expanded REAC configurations or redundancy
- Newly developed high-grade mic preamps
- 4U adjustable front or rear rack-mount design
- Supports 24-bit 96kHz, 48kHz, or 44.1 kHz audio
- Word clock in & out
- Remote control with any V-Mixer console, R-1000, S-4000R dedicated remote unit, and S-4000 RCS via USB (Windows/Mac)
- Specification
Number of Channels 32 in 24 out AD Conversion Sample Rate: 96.0 kHz, 48 kHz, 44.1 kHz Signal Processing: 24 bits DA Conversion Sample Rate : 96.0 kHz, 48 kHz, 44.1 kHz Signal Processing: 24 bits Frequency Response -2 dB / +0 dB (@ +4 dBu, 10 Hz to 40 kHz, Sample Rate : 96 kHz, typ.) Total Harmonic Distortion + Noise 0.007 % (Pad: Off, Input Gain: -10 dBu, 20 Hz to 20 kHz, typ.) Dynamic Range INPUT jacks (1 to 24): 110 dB (typ.) Channel Separation @ 1kHz INPUT jacks (1 to 24): 103 dB (Input Gain: +4 dBu, IHF-A, typ.)
OUTPUT jacks (1 to 16): 110dB (typ.)Nominal Input Level (Variable) -65 to -10 dBu (PAD: Off)
-45 to +10 dBu (PAD: On)Non Clip Maximum Input level INPUT jacks (1 to 24): +28dBu (1 kHz, 10 k ohms load, typ.) Input Impedance INPUT jacks (1 to 24): 7 k ohms Nominal Output Level OUTPUT jacks (1 to 16): +4 dBu (Load impedance: 10 k ohms, typ.) Maximam Output Level OUTPUT jacks (1 to 16): +22 dBu (Load impedance: 10 k ohms, typ.) Output Impedance OUTPUT jacks (1 to 16): 600 ohms (typ.) Recommended Load Impedance OUTPUT jacks (1 to 16): 10 k ohms or greater Residual Noise Level (IHF-A, typ.) OUTPUT jacks (1 to 16): -84 dBu Equivalent Input Noise Level (E.I.N.) INPUT jacks (1 to 24): -128 dB (Input Gain: -65 dBu, IHF-A, typ.) Network Latency 375 microseconds when using REAC cable only (AD to REAC to DA Latency: about 1.2 ms) Connectors INPUT jacks (1 to 24): XLR type, balanced, phantom power
OUTPUT jacks (1 to 16): XLR type, balanced
AES/EBU connector: DB-25 type
REAC port: RJ-45 EtherCon type
WORD CLOCK connector: BNC type
REMOTE connector: DB-9 type
COMPUTER port: USB type B
* XLR type: 1 GND, 2 HOT, 3: COLD
* phantom power: DC+ 48V (unloaded maximum),
14mA (maximum load) (All XLR type inputs)Power Consumption 62 W Operation Temperature +0 to +40 degrees Celsius
+32 to +104 degrees FahrenheitAccessories Power cord, Owner's manual, Rubber foot x 4 Dimensions (W x D x H) 19" x 13.75" x 7" Weight 21.7 lbs ( 9.7 kg) - Reviews
Write Your Own Review