Signal Processing & Effects
-
Klark Teknik VNET USB RS232 Interface
The VNET USB RS232 is a rack mountable interface for connecting a Windows PC running VNET Software to any VNET loudspeaker network. Capable of driving a network span up to 1 km and 50 devices, the VNET USB RS232 provides the PC user with complete control, tuning and diagnostics of all devices on the network. -
DBX DriveRack VENU360 Complete Loudspeaker Management System
The DBX DriveRack VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx's proprietary AutoEQ™ and AFS™ algorithms, additional input channels, ethernet control via an Android,® iOS,® Mac,® or Windows® device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.
-
BSS Audio BLU-100 12x8 Signal Processor with BLU link
The BSS Audio BLU-100 offers a fixed configuration of 12 inputs and 8 outputs, configurable signal processing and a high bandwidth, fault tolerant digital audio bus.
-
Community ALC-404D 4-Channel x 400W Amplified Loudspeaker Controller with DSP and Dante
Community's line of Amplified Loudspeaker Controllers (ALC) offers factory-optimized DSP processing, protective limiting and amplification, as well as signal routing, zone switching, and remote monitoring for virtually any Community loudspeaker application.
-
Allen & Heath GX4816 48 XLR Input / 16 XLR Output Portable GX Expander With DX Sockets for SQ and dLive
The Allen & Heath GX4816 is a 96kHz audio expander that provides high-input-count remote expansion for SQ, Avantis and dLive mixing systems. It's loaded with 48 dLive mic preamps with independent Phantom Power LED indicators, plus 16 XLR line outputs.
-
NEXO NXAMP-4X1 4 x 1 Powered TD Controller 4 x 600W @ 8 Ohms
The NEXO NXAMP4x1 4 x 1 powered TD controller uses advanced custom components based power amplifier design, the ultimate evolution of the Yamaha's EEEngine technology, offering the sonic purity of conventional class AB but a heat dissipation equaling the class D.
-
NEXO NXAMP4X1MK2 4x1 Powered TD Controller 4x600W @ 8 Ohms with DSP
Rated at 4 x 1300 Watts @ 2 Ohms, the NXAMP4X1MK2 combines advanced signal processing with four state-of-the-art Class D amplifiers to create a flexible, light-weight powering and control solution for NEXO loudspeaker systems.
-
NEXO NXAMP4X2MK2 4x2 Powered TD Controller 4x1200W @ 8 Ohms with DSP
Rated at in 4 x 2500 Watts, the NXAMP4X2MK2 combines advanced signal processing with four state-of-the-art Class D amplifiers to create a flexible, light-weight powering and control solution for NEXO loudspeaker systems.
-
NEXO NXAMP4X4 4 x 4 Powered TD Controller 4 x 1900W @ 8 Ohms
The NEXO NXAMP4x4 uses advanced custom components based power amplifier design, the ultimate evolution of the Yamaha's EEEngine technology, offering the sonic purity of conventional class AB but a heat dissipation equaling the class D.