Signal Processing & Effects
-
Peavey VSX 26e Loudspeaker DSP Management System
The Peavey VSX 26e is a DSP-based loudspeaker management system that boast a 96kHz sample rate, floating point DSP processor for quiet, accurate filter response, fully adjustable crossover points, and any-input-to-any-output routing flexibility.
List $499.99Price $399.99Savings $100.00 (20%) -
Peavey VSX 48e Loudspeaker DSP Management System
The Peavey VSX 48e is a DSP-based loudspeaker management system that boast a 96kHz sample rate, floating point DSP processor for quiet, accurate filter response, fully adjustable crossover points, and any-input-to-any-output routing flexibility.
-
Ashly Audio 3.6SP Protea DSP 3x6 System Processor
The 3.6SP (3-in x 6-out) is a great choice for both live sound and use in fixed installations like worship facilities, schools and performance spaces. Use the full Protea™ DSP Suite—crossover, equalization, compressor/limiter and delay—with up to 682ms on the input and the output, SPs serve as a front-end processor for delay stacks.
-
DBX DriveRack VENU360 Complete Loudspeaker Management System
The DBX DriveRack VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx's proprietary AutoEQ™ and AFS™ algorithms, additional input channels, ethernet control via an Android,® iOS,® Mac,® or Windows® device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.
-
BSS Audio BLU-100 12x8 Signal Processor with BLU link
The BSS Audio BLU-100 offers a fixed configuration of 12 inputs and 8 outputs, configurable signal processing and a high bandwidth, fault tolerant digital audio bus.
-
Community ALC-404D 4-Channel x 400W Amplified Loudspeaker Controller with DSP and Dante
Community's line of Amplified Loudspeaker Controllers (ALC) offers factory-optimized DSP processing, protective limiting and amplification, as well as signal routing, zone switching, and remote monitoring for virtually any Community loudspeaker application.
-
Allen & Heath dLive DX32 96kHz Modular Expander
The Allen & Heath DX32 is a fully modular expander for adding extra inputs and outputs to a dLive system. Each DX32 features 4 slots for 8 channels of high end, low noise microphone preamps, 8 analog outputs, 8 AES/EBU (32-192kHz sample rate, stereo) digital inputs & 8 AES/EBU (44.1, 48, 88.2, 96kHz switchable per output) digital outputs.
-
NEXO NXAMP-4X1 4 x 1 Powered TD Controller 4 x 600W @ 8 Ohms
The NEXO NXAMP4x1 4 x 1 powered TD controller uses advanced custom components based power amplifier design, the ultimate evolution of the Yamaha's EEEngine technology, offering the sonic purity of conventional class AB but a heat dissipation equaling the class D.
-
Community ALC-3202D 2-Channel x 3200W Amplified Loudspeaker Controller with DSP and Dante
Community's line of Amplified Loudspeaker Controllers (ALC) offers factory-optimized DSP processing, protective limiting and amplification, as well as signal routing, zone switching, and remote monitoring for virtually any Community loudspeaker application.
-
NEXO NXAMP4X1MK2 4x1 Powered TD Controller 4x600W @ 8 Ohms with DSP
Rated at 4 x 1300 Watts @ 2 Ohms, the NXAMP4X1MK2 combines advanced signal processing with four state-of-the-art Class D amplifiers to create a flexible, light-weight powering and control solution for NEXO loudspeaker systems.
-
Community ALC-1604D 4-Channel x 1600W Amplified Loudspeaker Controller with DSP and Dante
Community's line of Amplified Loudspeaker Controllers (ALC) offers factory-optimized DSP processing, protective limiting and amplification, as well as signal routing, zone switching, and remote monitoring for virtually any Community loudspeaker application.
-
NEXO NXAMP4X2MK2 4x2 Powered TD Controller 4x1200W @ 8 Ohms with DSP
Rated at in 4 x 2500 Watts, the NXAMP4X2MK2 combines advanced signal processing with four state-of-the-art Class D amplifiers to create a flexible, light-weight powering and control solution for NEXO loudspeaker systems.
-
NEXO NXAMP4X4 4 x 4 Powered TD Controller 4 x 1900W @ 8 Ohms
The NEXO NXAMP4x4 uses advanced custom components based power amplifier design, the ultimate evolution of the Yamaha's EEEngine technology, offering the sonic purity of conventional class AB but a heat dissipation equaling the class D.
-
Allen & Heath DX88-P 8-In / 8-Out 96kHz Expander
The Allen & Heath DX88 provides 8 inputs and 8 outputs on Phoenix / Euroblock connectors for fixed installations and is an easy way to add local or remote expansion to AHM Audio Matrix Processors.