- Description
Details
The emphasis with the Soundcraft EPM12 12 Channel High Performance Mixer is very firmly on quality build and audio performance, with an easy to understand control surface uncluttered by unnecessary facilities, and Soundcraft have brought new technologies and ideas to this very cost-effective range. Surface mount technology is used throughout, using close-tolerance components for high accuracy and repeatable settings for EQ and gain controls. The highly-transparent GB30 Mic amp (designed by Graham Blyth for the company’s 30th anniversary, and also used on the larger LX7ii and GB Series consoles) features high-resolution adjustment over a wide gain range of 55dB, and provides a stunning +22dB headroom through the console. True professional 48-volt phantom power caters for condenser microphones of all types.
A unique feature of the signal monitoring is the PEAK led. This uses multipoint signal take-offs to watch for overload in several parts of the channel strip, and the led lights more brightly as the signal approaches the peak point. For smooth and accurate channel control, the EPM has 60mm high quality faders as used on other Soundcraft desks. The monitor output and headphone output work in parallel so that performers can still listen on phones while an engineer is listening on studio monitors.- Features
Features
- Multi-point signal channel status monitoring with proportional illumination
- Precision GB30 mic pre-amps
- True, professional +48V phantom power for condenser microphones
- Insert points for external processing
- 12 mono input channel frame sizes, each with two stereo inputs
- 2 Aux sends, each globally switchable pre or post-fade
- Universal internal power supply
- Simple rack mounting options
- Specification
Frequency Response Mic/Line input to any output : 20Hz to 20kHz +/-0.5dB THD & Noise <0.007% Mic Input EIN 22Hz-22kHz unweighted : -128dBu (150Ω source) Bus Noise Measured RMS 150Ω Mix Mix at Max, Faders down : <-85dBu Crosstalk Channel Mute : >96dB typically @1kHz Fader cut-off (rel +10 mark) : >96dB typically @1kHz Aux Send pot offness : >86dB Input & Output Microphone Input : 2.4kΩ Impedances Line Input : 11kΩ Impedances Stereo Input : 100kΩ Impedances Outputs : 75Ω Input & Output Mic/Line input Maximum Level : +17dBu Levels Line input Maximum Level +30dBu Stereo Input Maximum Level +30dBu Mix Output Maximum level +20dBu Headphones (at 200Ω) 300mW EQ (Mono Input) HF 12kHz, ±15dB, shelving Mid 150Hz - 3.5kHz, ±15dB, Q=1.5 LF 60Hz, ±15dB, shelving Metering 12-segment LED bargraphs for Mix L&R outputs Operating conditions Temperature Range : -10ºC to +30ºC Operating conditions Relative Humidity : 0% to 80% Power Supply Integral lightweight switched-mode PSU AC mains supply 85V-270V AC, 50/60Hz universal input Power consumption Less than 20W Dimensions (H x W x D) 3.6" (91 mm) x 17" (432 mm) x 14.3" (362 mm) Weight 12.8 lbs, (5.8 kg) - Reviews
Write Your Own Review