- Description
Details
Professional Monitoring for the Professional Studio
The BX8 Carbon studio monitor helps you track, monitor, and mix with confidence by providing accurate sound and dynamic acoustic control. Equipped with a 8” woven Kevlar low-frequency driver and 1.25” natural silk dome tweeter, the BX8 Carbon delivers a flat frequency response, enhanced stereo imaging, and increased clarity for authentic, professional mixing. The bi-amplified 130 Watt Class A/B amplification means high power with less noise and ensures that your monitoring setup can handle today's modern music with ease. With the BX8 Carbon, your music is ready for any listening environment.
Sweeter Sweet Spot
The tweeter’s waveguide has been enhanced to provide an expansive sweet spot and superior stereo imaging. A wider mix position gives you professional monitoring for any caliber studio. Pinhole-mounted LED placement cues help locate and light up the sweet spot to ensure a speaker placement that reliably translates stereo information and frequencies. When the LEDs turn bright, you know you’re dead center and ready to start mixing your sessions or laying down tracks with the BX8 Carbon.
Acoustic Control
Mixing doesn’t occur in a vacuum. Your listening environment influences your mixing decisions and, ultimately, the sound of your music. The BX8 Carbon's Acoustic Space Control, a series of calibration tools, helps provide optimal acoustic conditions for tracking, mixing, and monitoring anywhere. Adapt the BX8 Carbon to any mixing environment—from bedrooms to basements to professional studios—without compromising frequency detail or stereo image. The result is a flexible monitoring setup for the most demanding mixing environments.- Features
Features
- Authentic, flat frequency response makes it ideal for recording studios
- 8" woven Kevlar low-frequency driver allows for clear, defined bass
- New, 130W (70+60) Class A/B bi-amplification makes it low-noise, high-power and durable
- Acoustic Space Control allows you to calibrate the BX8 Carbon to your mixing environment
- New waveguide with LED placement cues provides superior imaging
- 1.25" natural silk dome tweeter provides silky detail
- 38 Hz – 22 kHz frequency response allows it to handle modern music with ease
- Specification
Type 2-way near-field studio reference monitors LF Driver 8" Kevlar curved cone w/ high temperature voice coil & damped rubber surround, magnetically shielded HF Driver 1.25" (32 mm) magnetically shielded natural silk dome Frequency Response 38 Hz – 22 kHz Crossover Frequency 2.2 kHz LF Amplifier Power 70W HF Amplifier Power 60W Signal-to-Noise Ratio > 100 dB typical A-weighted Input Connectors 1 x XLR balanced input connector
1 x TRS balanced/unbalanced input connectorPolarity Positive signal at + input produce outward LF cone displacement Input Impedance 20 KΩ balanced, 10 KΩ unbalanced Input Sensitivity 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum Protection RF interference, output current limiting, over temperature, turnon/off transient, subsonic filter, external mains fuse Indicator Power on/off indicator on rear panel Power Requirements Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or 100 V ~50/60 Hz Cabinet Vinyl-laminated high-acoustic-efficiency MDF Dimensions (H x W x D) 15" (381 mm) x 10" (254 mm) x 12" (305 mm) Weight 26.4 lbs (12 kg) - Reviews
Write Your Own Review

