The WR Series was designed to provide rear access for equipment even when the equipment bays are placed up against a wall or back to back. Factory-assembled in its own host enclosure, the rack frame pulls out and rotates for service access. Specify a WR Series enclosure when easy access to rear equipment connections is required for larger audio, video and security equipment installations but an access aisle is not practical.
EIA compliant 19" roll out rotating system in steel host enclosure the WR-37-32 overall dimensions are 24" W x 76.61" H x 32-7/8" D. The rotating design of the rack allows enhanced access to rear equipment connections, simplifying wiring. This rack has 26" of useable depth and the rack frame is housed in a 32-7/8" depth host enclosure. The weight capacity is 750 lbs. The rack is constructed of the following materials: top and bottom (rack and outer frame) and roller carriage is 14-gauge steel; side panel and horizontal braces is 16-gauge steel. Rackrail is constructed of 11-gauge steel with tapped 10-32 mounting holes in universal EIA spacing with black e-coat finish and marked rackspaces. Also features removable split rear knockout panels with 1/2", 3/4", 1" & 1-1/2" electrical knockouts installed in base and removable split rear knockout panels with 1/2", 3/4", 1" & 1-1/2" electrical knockouts and BNC knockouts for UHF / VHF antenna installed in the top. Knockouts on sides to accommodate 4" electrical conduit and cable pass-through. Detachable rack frame allows for off-site integration. Roll out frame ships installed in rack. Rack is UL Listed in the US and Canada. This rack is also GREENGUARD Indoor Air Quality Certified for Children and Schools and RoHS EU Directive 2002/95/EC compliant.
