Special Order (Return conditions apply)
Please be aware that global supply shortages outside our control may interfere with our normal delivery times and product availability. For more information, email sales@proacoustics.com or call us at 888-256-4112.The SKM185 Stereo Matched Microphone Pair is a kit containing a stereo matched pair of the KM 185 microphones, a hypercardioid pattern, pressure gradient condenser microphone intended for live sound reinforcement and broadcast as well as recording applications. The KM 180 series microphones feature an output stage based on the KM 100. Transformerless circuitry and balanced output result in high output gain with a very low noise floor and no coloration to the output signal. The KM 185 mt is powered via +48 Volt phantom power.
The stereo pair are matched in sensitivity and frequency response and provide optimum results when capturing performances or ambiance. The KM 185 mt is powered via +48 Volt phantom power. Its 20-20kHz frequency response provides flexibility for use in a wide range of recording situations. The KM 185 provide attenuation at the off-axis sections of the mic, and are suitable for X,Y and ORTF stereo miking, announcer's mic for broadcast, spot capturing of drum overheads, strings, wind instruments, percussion, piano, and amp cabinets. The KM 185 handles sound pressure levels up to 142dB, allowing close miking of instruments high in transient (peak) level response.
| Acoustical operating principle | Pressure/Pressure gradient transducer |
|---|---|
| Directional pattern | Omnidirectional/cardioid/hypercardioid |
| Frequency range | 20 Hz - 20 kHz |
| Sensitivity at 1 kHz into 1 kohm | 12/15/10 mV/Pa |
| Rated impedance | 50 ohms |
| Rated load impedance | 1 kohms |
| Equivalent noise level, CCIR | 24/22/24 dB |
| Equivalent noise level, A-weighted | 13/13/15 dB-A |
| Signal-to-noise ratio, CCIR (rel. 94 dB SPL) | 70/72/70 dB |
| Signal-to-noise ratio, A-weighted (rel. 94 dB SPL) | 81/81/79 dB |
| Maximum SPL for THD 0.5% | 140/138/142 dB |
| Maximum output voltage | 10 dBu |
| Supply voltage (P48, IEC 61938) | 48 V ± 4 V |
| Current consumption (P48, IEC 61938) | 3.2 mA |
| Matching connectors | XLR 3F |
| Diameter | 22 mm |
| Length | 107 mm |
| Weight | 2.13 lbs (0.97 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
