- Description
Details
The MODEL 500 subwoofer amplifier was designed to offer performance, value, and flexibility. It incorporates a 500W class A/B amplifier utilizing the patented BASH technology for high electrical efficiency.
Four independent controls offer flexibility to integrate nearly all subwoofers with the main speakers and the listening environment. The continuously-variable low pass filter network is adjustable from 40 to 120Hz and can be bypassed if it is preferable to use an external filter or one located in an outboard receiver or processor. The continuously-variable phase circuit is adjustable from 0 to 180 degrees to finely integrate the subwoofer with the main listening speakers.
The MODEL 500 incorporates a unique subsonic filter adjustable from 20 – 35Hz that limits/extends power output to the lowest frequency the subwoofer driver is capable of reproducing. This maximizes performance, helps to protect the subwoofer driver from being overdriven and will reduce distortion by limiting extreme subwoofer driver excursions. The MODEL 500 also incorporates stereo Line-Level inputs and outputs that permit the amplifier to be connected between a preamplifier and amplifier without the need for Y-connectors. The Line-Level inputs also incorporate a buffered internal summing network so that a mono signal is derived from the left and right channels while maintaining the stereo signal integrity for the main stereo speakers. A double-insulated, isolated-ground electrical supply prevents electrical ground loops and reduces the noise floor of the entire audio system.
- Features
Features
- Designed to offer performance, value, and flexibility
- Incorporates a 500W class A/B amplifier utilizing the patented BASH technology for high electrical efficiency
- 4 independent controls offer flexibility to integrate nearly all subwoofers with the main speakers
- Low pass filter network is adjustable from 40Hz to 120Hz
- Phase circuit is adjustable from 0 to 180 degrees
- Continuously-variable subsonic filter is adjustable from 20Hz to 35Hz to preserve amplifiers power
- Defeatable Auto-power mode turns the amplifier on automatically
- Autopower mode can be defeated if it is desirable to use a remote AC circuit to control the amplifier power
- Dual subwoofer outputs allow multiple woofers to be connected to the same amplifier
- Line Level inputs and outputs permit the amplifier to be connected between a preamplifier and amplifier without the need for Y-connectors
- Double-insulated isolated-ground electrical supply
- Specification
Frequency Response 20Hz – 300Hz Crossover Frequency 40Hz – 120Hz (Low-pass filter with bypass switch) Phase Adjustment 0 – 180 degrees (Continuously variable) Amplifier Output Power 500 watts RMS into 4 ohms, 250 watts RMS into 8 ohms, Distortion Less than 0.2% at rated power Audio Inputs Summing stereo line level (RCA x2), LFE (RCA shared with Left input connector) Input Impedance Line Level – 20k ohms, Unbalanced Input Power 120V 60Hz AC Input Power Connection IEC 2-wire receptacle with integral fuse holder Power (Mains) Fuse 5A 250V T5AL (5x20mm) style Slow Blow Power Modes Auto signal sensing and always on Auto Off Delay ~10 minutes Dimensions (W x H x D) 16-7/8" x 3-7/8" x 14.75" (429 x 98 x 375 mm) (with feet, without ears) Shipping Dimensions (W x H x D) 21.5" x 8.5" x 17.5" (550W x 220H x 450D mm) Weight 15 lbs (6.8 kg) Shipping Weight 20 lbs (9.1 kg) - In The Box
In The Box
- Amplifier
- Rack Ears with Screws
- Power Cord
- Owners Manual
- Reviews
Write Your Own Review
