- Description
Details
The STUD Woofer fits in standard 2" x 4" walls. It fastens directly to 16" on-center wall studs so it will not work itself loose from the drywall. It does not require any special cabinet or bracing, it is entirely retrofit-able. It was designed to be installed in standard 2" x 4" or 2" x 6" walls with 1/2" drywall without any need for reinforcement, blocking, etc.
The SE-10SWD dual channel and dual voice coil model may be driven directly by amplified Stereo low pass signals or be fitted with two modular 10-MX crossovers for Stereo Sub / Satellite systems. It is perfect for people who want an In-Wall Subwoofer that is a near equal to the sound quality of the best cabinet type Subwoofers, but do not want the inconvenience or unsightly situation of fitting a speaker cabinet into their living space. It is also made for the latest Dolby Digital Home Theater System technology. Match one or two of this audiophile inspired design with any brand In-Wall speakers to greatly enhance the bass response in a smooth extended manner while maintaining an uncluttered living space.- Features
Features
- Paintable grille and frame to match your decor
- Tuned twin port design
- Tuned for optimum performance in a wide variety of wall configurations, including standard 2" x 4" & 2" x 6", 7' 10" high residential walls
- Supplied with port plugs which enable the STUD Woofer to be used in infinite baffle arrangements
- Specification
Frequency Response 25Hz - 200Hz Power Handling 150 watts max. Sensitivity 87dB 1 watt / 1 meter Grille Perforated Metal Grille Impedance 8 ohms nominal Overall Dimensions (W x H x D) 19-1/2" x 19-1/2", 1-3/4" Face Relief Cut-out Dimensions (W x H) 14-1/2" x 16-1/2" Mounting Depth 3-3/8” (Minimum) Frequency Range 20Hz to 500Hz *(Dependent on configuration) Weight Approx. 10 lbs. (4.54 kg) - Reviews
Write Your Own Review