Peavey Impulse 1015 8 Ohm 15" 1000W Weather-Resistant Loudspeaker
The Impulse 1015 is an IP44 rated weather-resistant passive two-way sound reinforcement system based on a Black Widow® woofer and an RX™22N titanium diaphragm dynamic compression driver mounted on a 110 by 80 degree coverage Quadratic Throat Waveguide™. Its contemporary appearance coupled with exceptional performance offers a highly desirable combination.
The light yet durable injection-molded plastic enclosure with molded-in stand mount cup eases portable use for live music or PA sound. The trapezoidal cabinet has three handles for ease of portability, and two extra angled sections on either side to allow use as a floor monitor.
Two mounting point locations, top and one on the side for attaching the Peavey® VM™ 70 mounting bracket. A full length powder coated perforated steel grille with cloth backing provides system protection and a professional appearance.
| Frequency Response | 68 Hz to 18 kHz, 1 meter on axis, swept sine in anechoic environment |
|---|---|
| Usable Low Frequency | 59 Hz limit (-10 dB point anechoic) |
| Nominal Sensitivity | 97 dB (average) (1W @1M, swept sine input in anechoic environment |
| Maximum Sound Pressure Level (1 Meter) | 124 dB continuous 130 dB SPL peak with music |
| Low Frequency Transducer | 1 X 15" woofer, vented |
| High Frequency Transducer | 1 X 1.0" exit, 50 mm voice coil |
| Electro-Acoustic Crossover Frequency | 1.9 kHz |
| Crossover Type | Internal passive two-way crossover with driver EQ, and driver level matching incorporated |
| Impedance | Nominal: 8.0 Ω Minimum: 5.3 Ω |
| Input Connections | Two NL-4 twist-lock jacks in parallel with a 4 position screw terminal barrier strip |
| Enclosure Materials & Finish | Black polypropylene plastic with textured surface, black powder-coated perforated full-coverage grille |
| Mounting Provisions | Four rubber feet provide vibration free floor or stage use, and a molded-in stand mounting cup is on the bottom for use with 1 3/8" stand poles. Unit has two four insert mounting groups (8 inserts total) of M6 metric inserts, for use with the Peavey VM 70 mounting bracket, one on the left side, and one on top |
| Dimensions (H x W x D) | 28.3" (719 mm) x 16.75" (426 mm) x 15" (381 mm) |
| Weight | 48 lbs (21.8 kg) |
| Shipping Dimensions (H x W x D) | 31.1" (790 mm) x 20.4" (518 mm) x 19.1" (485 mm) |
| Shipping Weight | 50.99 lbs (23.13 kg) |
Usually arrives in 5-9 business days.
