The PVXp 15 DSP features a reliable bi-amped power section that provides a total of 830W of peak available dynamic power. With that much available power, speaker protection is critical. Advanced digital signal compression prevents audible overload, protecting the speakers from harmful distortion at high output levels. This powered enclosure also includes heavy duty speaker drivers; it features a 15" woofer with a 2-3/8" voice coil and a 50 oz. magnet. This is coupled with the RX14 compression driver that includes a 1.4" titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn.
The PVXp 15 DSP provides a balanced input via a combination jack that accepts a balanced TRS 1/4" input, as well as a balanced XLR input and summed RCA jacks. There are two balanced Thru outputs, a male XLR and a 1/4" TRS. The LCD display and EQ presets, along with other operating parameters are accessed via a one-knob selector.
| Frequency Range | 49 Hz to 20 kHz |
|---|---|
| Frequency Response | 58 Hz to 20 kHz (±3 dB) |
| Usable Low Frequency Limit | 52 Hz (-10 dB point anechoic) |
| Nominal Sensitivity | 97 dB (average) |
| Maximum Sound Pressure Level | 128 dB SPL peak with music |
| Radiation Angle | Nominal: 100° horizontal X 50° vertical (measured at -6dB point of polar response) |
| Transducer Complement | Heavy-duty 15" woofer with 2 3/8" voice coil & 50 oz. magnet RX™14 1.4" titanium diaphragm dynamic compression driver |
| Box Tuning Frequency | 57 Hz |
| Electroacoustic Crossover Frequency | 2,100 Hz |
| Internal Power Amplifiers (@120 VAC line) | Total of 830W peak available dynamic power Woofer - 630W peak available dynamic power |
| Continuous Power | 230W @ less than 1% distortion Tweeter - 200W peak available dynamic power |
| Electronic Input Impedance (Nominal) | Line: 2.2 k ohms balanced (1/4"), 10 k ohms unbalanced 1/4" Mic: 2.2 k ohms balanced (XLR) No phantom power available |
| Input Sensitivity for Full Output (Level full CW) | 0.48V RMS in the Line position 0.01V RMS in the Mic position |
| Infrasonic Filter Protection | 36 dB/octave roll-of |
| Nominal Amplifier Frequency Response | +0, -3 dB from 20 Hz to 20 kHz |
| THD and IM | Typically less than 0.5 % |
| Damping Factor | Greater than 100 @ 1000 Hz, 8 Ohms |
| Power Requirements of Peavey PVXp 15 System | Nominal 120W, 100 - 240 VAC 50 - 60 Hz |
| Front Dimensions (H x W x D) | 28.25" (718 mm) x 18.90" (480 mm) x 18.71" (475 mm) |
| Rear Dimensions (H x W x D) | 26.25" (667 mm) x 10.25" (260 mm) x 18.71" (475 mm) |
| Weight | 51 lbs (23.2 kg) |
| Shipping Weight | 58 lbs (26.308 kg) |
Usually arrives in 5-9 business days.
