The Peavey® SP®4P is a powered, bi-amplified, two-way speaker system engineered to provide very high levels of performance in a compact powered loudspeaker. This quasi-three-way powered system is comprised of a 1000W peak switching power amplifier driving a pair of 15" Black Widow® BWX series woofers, now with a long throw voice coil. The 2" RX™22CT titanium diaphragm compression driver is driven by a 500W peak switching power amplifier and is coupled to a low coloration waveguide with a coverage pattern of 100° horizontal by 50° vertical.
The SP®4P is capable of up to 131 dB peak SPL. The enclosure is constructed of plywood augmented with internal braces, covered with a textured black painted finish. The shape is a trapezoidal form, with a full-length coated perforated steel grille, to offer an attractive yet durable powered speaker system. A pair of four-way inset handles, one on each side, and a set of casters on the bottom rear edge and a top rear handle provide convenient transport and handling. Multiple fly points are provided to allow overhead rigging. The cabinet and grille are black. Two independent mixed input channels each offer a balanced input to the preamp/EQ electronics and a level control. Each channel has one combo female XLR and 1/4" TRS phone jack. It is switchable between mic-level and line-level sensitivity. Channel 2 has a 3.5 mm media jack added. A line out section has male XLR connectors. The Thru outputs allow linking of additional speaker systems, or feed of the signal to a powered subwoofer, etc.
The power amplifiers providing the bi-amplification are low-distortion switching units providing 1000W peak available power into the nominal 4 ohm load of the woofer, and a 500 W peak available power into the nominal 8 ohm load of the tweeter. The power supply for both amps is a switch mode type for low weight and high efficiency. Both amplifiers feature our DDT™ compression, which virtually eliminates audible power amplifier clipping. Cooling is via forced air circulation.
The combination of the Black Widow® BWX woofer with the RX™22CT tweeter and DSP crossover and EQ provide a clarity and impact beyond conventional powered enclosures. The switching power amps and switch-mode power supply, along with the professional grade speaker components, provide this high level of technological sophistication at a very lightweight, while at a very reasonable cost.
| Frequency Response | 57 Hz to 17 kHz |
|---|---|
| Usable Low Frequency Limit (-10 dB point) | 57 Hz |
| Internal power amplifiers (@120 VAC line) | Woofer - 1000 watts peak available power Continuous Power: 500 watts @ less than 1% distortion Tweeter - 500 watts peak available power Continuous Power: 250 watts @ less than 1% distortion |
| Maximum Sound Pressure Level (1 meter) | 131 dB music peak |
| Transducer Complement | Low Frequency Section: 2 x 15" woofer, vented Black Widow® 1508-8 SPS High Frequency Section: 1 x 1" exit, 50 mm voice coil RX22CT compression driver on asymmetrical Quadratic Throat CD Horn |
| Box Tuning Low Frequency Section | 65 Hz |
| Electroacoustic Crossover Frequency | 1.82 kHz |
| Dimensions (H x W x D) | 43.5" (1105 mm) x 16.75" (426 mm) x 16.85" (428 mm) |
| Net Weight | 104.72 lbs (47.5 kg) |
| Shipping Weight | 109.13 lbs (49.5 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
