PTZ Optics PT-CM-1 Universal Ceiling Mount for HuddleCams and PTZOptic Cameras

This PTZOptics ceiling mount is designed to support most small-based PTZ cameras and securely mount them to any surface with the supplied hardware. This mount features a universal design that works with many SONY, Panasonic, Cisco, Polycom, Vaddio, HuddleCamHD, Lumens, and DataVideo cameras.

This universal camera mount includes all the hardware necessary for installation. Follow the step-by-step installation guides for professional and secure mounting.

Open one of the PTZ camera mounts and you'll find a detailed installation manual that outlines instructions for mounting your camera to various surface types like drywall, block, and hard surfaces. Each camera mount is designed for flexibility, allowing installers to easily level each mounting location with special slotted holes. PTZ camera mounts are designed by audiovisual professionals for audiovisual professionals. With a ten-year warranty on every mount, we stand behind the quality of these camera mounts.

This set includes a ceiling bracket and a camera bracket. The ceiling bracket can be securely mounted to any wood or drywall ceiling, as well as US or European electrical gang box. Once your ceiling bracket is securely attached to your ceiling attach your PTZ camera using the included 1'4-20 screw. Next, attach the two brackets by sliding the camera bracket into the ceiling bracket.

Please note: Once the camera brackets are connected, use the included safety screws to ensure that the mounts do not disconnect.

• Compatible with all PTZOptics cameras
• Compatible with most small based SONY, Panasonic, Cisco, Polycom, Vaddio, HuddleCamHD, or other cameras with a 1/4-20 mounting hole
• Mounts directly to ceiling with supplied hardware
• Also mounts directly to U.S. single gang device box or
• U.S. 4" square, round, or octagonal junction box
• Universally compatible with any camera with 1/4-20 mounting interface
• Mounting hardware included

Data Sheet

Setup Guide