- Description
Details
The WideLine features an open, natural sound quality and exceptionally wide 140° horizontal coverage pattern - the widest of any line array system currently available.
The WideLine's 16 ohm per transducer low-frequency impedance optimizes allocation of amplifier channels. In biamp mode the LF/MF sections of up to four enclosures can be powered by one amplifier channel operating into a two-ohm load. In triamp mode the LF and MF sections of up to eight enclosures can be powered by a single two-channel amplifier.
The enclosure of the WL2102-w (pictured) is constructed of industry standard birch plywood resulting in a slight increase in weight; 83 lbs/37.7 kg vs. 70 lbs/31.8 kg for the WL2102, at a substantial cost savings for more price sensitive applications where the ultra lightweight and extreme weather resistance of the cored composite enclosure are not required. The mechanical design allows composite and plywood enclosures to be arrayed together.
Wideline features a unique 3-point suspension system allowing construction of arrays of up to 24 enclosures (5:1 design factor). A 12 enclosure hang will maintain a 10:1 design factor which may be dictated by local regulations and practices. Vertical splay angles between adjacent enclosures are adjustable in one-degree increments from zero to ten degrees. All hardware required to construct an array is permanently attached to the enclosure; there are no loose parts to misplace.
- Features
Features
- Multiple aperture diffraction slot waveguide provides exceptionally wide horizontal coverage (140°) and a near ideal vertical line source
- Exceptionally high output capability in a very compact form factor
- Bi-amp or tri-amp design
- Dual 10" long excursion, high power, low-frequency transducers
- Single 3" diaphragm neodymium compression driver
- Birch ply construction offers reasonable weight (83 lbs, 37.7 kg) at a lower cost
- Fully captive hardware design incorporates all components necessary for box to box rigging
- Available in black and white
- Specification
Configuration Bi-amp or Tri-amp mode Transducers High Frequency Transducer 1.4" exit, 3" titanium diaphragm, neodymium magnet assembly Low Frequency Transducer 2 x 400 W, 16 ohm 10" woofer, 3" voice coil, ceramic magnet assembly Frequency Response (±3 dB) 55 Hz - 18 kHz (with recommended DSP processing) Frequency Response (-10 dB) 48 Hz - 20 kHz (with recommended DSP processing) Nominal Impedance HF: 16 ohms LF bi-amp mode: 8 ohms LF tri-amp mode: 16 ohms (x 2) Continuous Power Capacity HF 80 W (2 hours, AES1984-2 method, 1 - 10 kHz) LF bi-amp mode 600 W (2 hours, AES1984-2 method, 80 - 800 Hz) LF tri-amp mode 400 W (x2) (2 hours, AES1984-2 method, 80 - 800 Hz) Max Recommended Power HF: 300 W LF bi-amp mode: 1400 W LF tri-amp mode: 700 W (x 2) Sensitivity (1 W at 1 m) HF 107.5 dB (single cabinet measured in free space.) LF 98 dB (single cabinet measured in free space. LF drivers connected in parallel) Maximum Output (SPL at 1 m) Continuous HF: 127 dB / LF: 127 dB Peak HF: 133 dB / LF: 133 dB Nominal Coverage Horizontal: 140° Vertical: Dependent on number of elements used Enclosure Cabinet Type Ported, trapezoidal Material Baltic birch plywood Finish Black or white texture coat Grille Perforated, formed powder coated steel Connectors 2 x Neutrik Speakon® NL8 in parallel Pin Outs Pins (1+/1-, 2+/2-, 3+/3-, 4+/4-) Bi-Amp (LF, NC, NC, HF), Tri-Amp (MF, LF, NC, HF) Attachment Points Integral, adjustable rigging system, vertical splay adjustable in 1° increments 2 ° to 10° and 0° Dimensions (H x W x D) 10.75" x 27.5" x 20.25" (27.3 cm x 69.85 cm x 51.43 cm) Net Weight 83 lbs (37.7 kg) Shipping Weight 91 lbs (41.4 kg) - Reviews
Write Your Own Review
GET RELIABLE FREE SHIPPING* WITH CODE: FREESHIP
*Valid On Orders $199+ & Under 60lbs - Click Here For More Details
Quote 0 item
Recently added item(s) ×
You have no items in your quote.
Cart 0 item
Recently added item(s) ×
Your cart is empty.
Ordering
About Pro Acoustics
We Accept
