RDL D-J3 Mic/Line Input Panel Assembly
Write a Review
RDL D-J3 Mic/Line Input Panel Assembly
Description
RDL D-J3 Mic/Line Input Panel Assembly
The D SERIES-J3 is a complete audio input panel assembly. The front panel features a female XLR jack and two phono jacks. The XLR is connected directly to the rear-panel barrier block. The phono jacks are intended for mono or stereo consumer-level sources. LEFT and RIGHT are combined and balanced through audio transformers configured to reject induced hum. The line-level output is provided on the rear-panel terminal block for connection to 10 kΩ or higher input impedance line level module or equipment inputs. The back of the D SERIES-J3 is finished with a metal enclosure clearly labeled for easy installation.
The D SERIES-J3 fits directly into back boxes, available from RDL to fit cabinets or US or international walls (RDL WB-1U). They may be mounted directly into cabinets or most standard US single-gang electrical boxes.
Features
- Wall Mounted Audio Inputs
- XLR Microphone Input with Gold Contacts
- Gold Plated Phono Jack Line Inputs
- Hum Cancellation on Unbalanced Line Inputs
- Transformer Isolation for Unbalanced Line Inputs
- Balanced Mono Output for Unbalanced Mono or Stereo Line Inputs
Specifications
| Input Connectors | XLR female with gold contacts (1); Phono jacks with gold contacts (2) |
|---|---|
| Output Connector | Terminal block |
| Output Connections (5) | Line: +, ‑, SHIELD; Mic: SHIELD (XLR pin 1), + (XLR pin 2), ‑ (XLR pin 3) |
| Frequency Response (Line In) | 30 Hz to 20 kHz (±1 dB) |
| Power Requirement | Passive |
| Mounting Box Requirement | Width: 1.80" (45.72 mm) Depth: 1.75" (44.45 mm) |
| Dimensions (H x W x D) | 4.13" (104.9 mm) x 1.7" (43.2 mm) x 2.15" (54.6 mm) |
| Weight | 0.4 lbs (0.18 kg) |