RDL EZ-MPA2X Dual Microphone Preamplifier

Name: RDL EZ-MPA2X Dual Microphone Preamplifier
Brand: RDL Radio Design Labs
SKU: RDL-EZ-MPA2X
Price: 268.41 USD
Availability: InStock

Write a Review

Part #:

EZ-MPA2X

Model #:

EZ-MPA2X

Current Stock:

MSRP: $357.88

$268.41

Availability: Usually arrives in 5-9 business days.

Quantity:

Adding to cart… The item has been added

Certified Audio
Expertise

FREE Custom
System Design

Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112

Description

The EZ-MPA2X is a stereo microphone preamplifier with front-panel volume controls and audio level metering. A front-panel switch engages audio compressors to control overloads and clipping during high level audio bursts or peaks from the microphones. Dynamic or condenser microphones are both supported with rear-panel switchable phantom voltage. The line output is available on RCA or MINI jacks. Left and right channel LED VU metering facilitates easy level adjustment. The EZ-MPA2X is ideal to add microphone inputs to mixers and amplifiers with line inputs. It is used in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms, studios and commercial sound systems.

Features

Left and Right Balanced XLR Microphone Inputs.
Switch-Selectable Phantom on Rear Panel.
Unbalanced Output on MINI or RCA Jacks.
Input and Output Connections on Rear Panel.
Front-Panel Compressor Enable/Disable Switch.
Audio Compressors Control Overloads.
Front-Panel LEVEL Control for Each Channel.
Dual-LED VU Meter for Each Channel.
Advantages:
Optimized for Dynamic or Condenser Mics.
Headroom Accomodates High Input Levels.
Headroom Increases with Lower Gain Settings.
Compressor Limits Clipping Over Wide Dynamic Range.

Specifications

Model	EZ-MPA2X
Product Type	Microphone Preamplifier
Inputs (2)	1.2 kΩ balanced on XLR jack, mic-level, -11 dBu max.
Level controls (2)	Off to 50 dB gain for each input
Outputs (2)	-10 dBV nominal, +16 dBV max. without compression, -4 dBV max. with 20 dB compression
Frequency Response	80 Hz to 40 kHz (±1 dB, mic input, -6 dB at 20 Hz with integral high-pass filter)
THD+N	< 0.1% (35 Hz to 20 kHz, -50 dBu input)
Compression	20 dB range, switch-selectable
Crosstalk	Below noise floor (1 kHz)
CMRR	> 55 dB (20 to 20 kHz)
Metering	Dual-LED VU Meter for Left and Right, calibrated to -10 dBV output
Phantom	Switch-selectable 24 V (IEC 1938: 1996-12)
Noise	< -65 dB (below -10 dBV output, -50 dBu input)
24 Vdc power supply current	65 mA (idle), 90 mA (max.), 110 mA (max. with phantom)
Mounting size	1/3 rack width
Case Dimensions	5.75" (14.6 cm)W x 3" (7.6 cm)D
Weight	1 lbs