RDL ST-GCA3 Gain Control Line Level Amplifier
Usually arrives in 5-9 business days.
The RDL ST-VCA3 Voltage Controlled Amplifier is used in applications requiring smooth audio level control from a remote control panel, potentiometer or dc voltage (0 to 10 V). Installation in series with the audio input of a power amplifier allows remote control of that amplifier's level.
The RDL ST-VCA3 Voltage Controlled Amplifier is used in applications requiring smooth audio level control from a remote control panel, potentiometer or dc voltage (0 to 10 V). Installation in series with the audio input of a power amplifier allows remote control of that amplifier's level. For installations where it is preferred to keep the audio localized in the rack, audio controls are extended outside the rack from the ST-VCA3. Many installations benefit from avoiding long-term potentiometer wear from audio running through the potentiometer. An ST-VCA3 with external dc control provides virtual immunity from scratchy audio. Audio/video system control units often provide 0 to 10 Vdc control outputs that can directly control audio levels using an ST-VCA3. The ST-VCA3 is primarily intended for line-level attenuation; a high quality utility microphone preamplifier is included in the module. If remote control of a microphone preamplifier is desired, such as a wall mounted level control for a microphone jack, the ST-VCA3 may serve as a remote controlled microphone preamplifier.
| Inputs (2) | Mic: 200 Ω balanced; 5 kΩ unbalanced |
|---|---|
| Line | 30 kΩ bal. bridging or unbalanced |
| Input Levels (for +4 dBu output) | Mic: –44 dBu to –60 dBu (150 Ω source)Line: ‑18 dBu (‑20 dBV) to +4 dBu |
| Output Signal (normal rated) | +4 dBu, 150 Ω balanced |
| Headroom | 18 dB |
| THD+N | Mic: < 0.05%; Line: |
| Frequency Response | Mic: 30 Hz to 20 kHz (±1 dB)Line: 10 Hz to 20 kHz (±0.1 dB) |
| Noise | Mic: < ‑71 dB below +4 dBu output (150 Ω source; 50 dB gain) Line: |
| CMRR | Mic: > 60 dB; Line: > 60 dB, (50 Hz to 120 Hz) |
| Control Input | 0 to 10 Vdc or 0 to 10 kΩ Linear |
| Attenuation Range | 0 to 90 dB (>90 dB at 0 Vdc control) |
| Power Requirement | GROUND‑REFERENCED, 24 to 33 Vdc @ 50 mA |
| Dimensions (H x W x D) | 0.7" (17 mm) x 3" (76 mm) x 1.6" (39 mm) |
| Weight | 0.25 lbs (0.113 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.