AKG C414 XLII MATCHED PAIR Stereo Set

Home /
Studio & Recording /
AKG C414 XLII Matched Pair Stereo Set

Description

Details

The C414 XLII reference multi-pattern condenser microphone offers a choice of nine polar patterns for the perfect sonic capture for every application. The C414 XLIIs slight presence boost and impressive spatial reproduction are both similar to the legendary AKG C12 microphone from 1953.

Features

Features

AKG’s legendary 1” edge-terminated large diaphragm sound
Nine different polar patterns for the perfect sound
Lock Mode: for live-sound operation all controls can be disabled easily
Peak Hold LED: even displays shortest overload peaks
High sensitivity and extremely low self noise
High sound pressure level capability and wide dynamic range
Completely immune to electrostatic and electromagnetic interference
Three switchable bass cut filters and three pre-attenuation
All switchable components operate in low impedance circuits for ultra-high reliability even in extremely humid conditions
Elastic capsule suspension greatly minimizes structurally transmitted noise from chassis vibration
Pop filter, wind screen and spider-type shock mount included

Specification

Type:	One Inch Large Diaphragm Pressure Gradient Microphone
Polar Patterns	Nine, Selectable
Open-Circuit Sensitivity	23 mV/Pa (-33 dBV ± 0.5 dB)
Frequency Range	20 to 20,000 Hz
Impedance	≤ 200 ohms
Recommended Load Impedance	≥ 2200 ohms
Bass Cut Filter Slopes	12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Pre-Attenuation Pads	-6 dB, 112 dB, -18 dB (selectable)
Equivalent Noise Level to IEC 60268-4	20 dB (0 dB pre-attenuation)
Equivalent Noise Level to IEC 60268-4 (A-Weighted)	6 dB-A (0 dB pre-attenuation)
Signal/Noise Ratio re 1 Pa (A-Weighted)	88 dB
Max. SPL for 0.5% THD	200/400/800/1600 Pa = 140/146/152/158 dB SPL (0/-6/-12/-18 dB pre-attenuation)
Dynamic Range	134 dB min
Max. Output Level	5 V rms (+14 dBV)
Environment	Temperature: -10°C to +60°C R.H: 95% (+20°C); 85% (+60°C)
Powering	48 V phantom power to IEC 61938
Current Consumption	Approx. 4.5 mA
Connector	3-pin XLR (pin 2 hot)
Dimensions (H x W x D)	2" (50 mm) x 1.5" (38 mm) x 6.3" (160 mm)
Net Weight	0.66 lbs (0.300 kg)

Documents