- Description
Details
The SKM185 Stereo Matched Microphone Pair is a kit containing a stereo matched pair of the KM 185 microphones, a hypercardioid pattern, pressure gradient condenser microphone intended for live sound reinforcement and broadcast as well as recording applications. The KM 180 series microphones feature an output stage based on the KM 100. Transformerless circuitry and balanced output result in high output gain with a very low noise floor and no coloration to the output signal. The KM 185 mt is powered via +48 Volt phantom power.
The stereo pair are matched in sensitivity and frequency response and provide optimum results when capturing performances or ambiance. The KM 185 mt is powered via +48 Volt phantom power. Its 20-20kHz frequency response provides flexibility for use in a wide range of recording situations. The KM 185 provide attenuation at the off-axis sections of the mic, and are suitable for X,Y and ORTF stereo miking, announcer's mic for broadcast, spot capturing of drum overheads, strings, wind instruments, percussion, piano, and amp cabinets. The KM 185 handles sound pressure levels up to 142dB, allowing close miking of instruments high in transient (peak) level response.
- Features
Features
- Three different miniature microphones for all typical studio applications
- Transformerless circuitry
- Trouble-free operation also with unbalanced equipment (e.g., DAT recorders)
- Set includes windshield and two different microphone clamps
- Specification
Acoustical operating principle Pressure/Pressure gradient transducer Directional pattern Omnidirectional/cardioid/hypercardioid Frequency range 20 Hz - 20 kHz Sensitivity at 1 kHz into 1 kohm 12/15/10 mV/Pa Rated impedance 50 ohms Rated load impedance 1 kohms Equivalent noise level, CCIR 24/22/24 dB Equivalent noise level, A-weighted 13/13/15 dB-A Signal-to-noise ratio, CCIR (rel. 94 dB SPL) 70/72/70 dB Signal-to-noise ratio, A-weighted (rel. 94 dB SPL) 81/81/79 dB Maximum SPL for THD 0.5% 140/138/142 dB Maximum output voltage 10 dBu Supply voltage (P48, IEC 61938) 48 V ± 4 V Current consumption (P48, IEC 61938) 3.2 mA Matching connectors XLR 3F Diameter 22 mm Length 107 mm Weight 2.13 lbs (0.97 kg) - Reviews
Write Your Own Review