- Description
Details
Classic proportions combined with attractive styling and fresh ideas – the TLM 107 perfectly embodies the Neumann philosophy: Innovation based on tradition. Far from evoking vintage or retro nostalgia, the standard-setting TLM 107 represents an impressive, modern studio microphone. Its extensive performance spectrum and high-precision reproduction, very close to the original, make the TLM 107 universally applicable, opening up previously unknown design freedom possibilities in mixing and post-production.
The newly developed sound transducer, which was designed especially for this microphone, is impressive with its outstanding impulse fidelity. The great consistency of the five polar patterns, omnidirectional, cardioid and figure-8, with the intermediate patterns wide-angle cardioid and hypercardioid, is also unusual for a large-diaphragm capsule. The TLM 107 provides optimal sound not only for the cardioid setting; it also ensures maximum precision over the entire frequency range for all of the other directional characteristics. The sound always remains balanced, with an almost linear reproduction up to 8 kHz, and a slight boost in the highest frequencies that lends presence and freshness to the voice. Here particular attention has been paid to the natural reproduction of speech sounds, especially the critical “s” sound. The grille is acoustically optimized for low sensitivity to pop sounds. In addition, the sound transducer is edge-terminated, with both diaphragms at ground voltage. Specifically, this ensures considerably reduced sensitivity to dust and humidity.- Features
Features
- For studio, broadcasting and demanding home recording applications.
- No-Compromise Sound Design.
- Innovative Operating Concept.
- Available in the colors matte nickel and black.
- Specification
Acoustical operating principle Pressure gradient transducer Directional pattern Omnidirectional, wide angle cardioid, cardioid, hypercardioid, figure-8 Frequency range 20 Hz - 20 kHz Sensitivity at 1 kHz into 1 kohm 11 mV/Pa Rated impedance 50 ohms Rated load impedance 1 kohms Equivalent noise level, CCIR 22 dB Equivalent noise level, A-weighted 10 dB-A Signal-to-noise ratio, CCIR (rel. 94 dB SPL) 72 dB Signal-to-noise ratio, A-weighted (rel. 94 dB SPL) 84 dB Maximum SPL for THD 0.5% 141 dB with preattenuation -6 dB 147 dB with preattenuation -12 dB 153 dB Max. output voltage for THD < 0.5 % 10 dBu Power Supply (IEC 61938) P48 Current consumption 3.2 mA Required connector XLR 3 F Diameter 64 mm Length 145 mm Weight 2.51 lbs (1.14 kg) - Reviews
Write Your Own Review