- Description
Details
sE Electronics sE2200 Large Diaphragm Cardioid Condenser Microphone
The sE2200 is the latest version of the fan-favorite condenser that put sE Electronics on the map many years ago with its smooth, polished sound for vocals, voiceovers, and numerous instrumental applications. Like its predecessors, the sE2200 is a high-quality condenser microphone intended for a wide range of studio applications, from vocals and spoken word to acoustic instruments to drums and beyond. Thanks to its hand-crafted large-diaphragm true condenser capsule, shielded custom transformer and class-A circuitry (no ICs here!) it delivers pristine, flattering sound quality, exceptionally low noise, and an even, well-balanced frequency response.
The electronics and the switchable attenuation pads ensure a high dynamic range, with high sound pressure level (SPL) handling capability and extremely low-noise components. The switchable low-cut filters eliminate rumble or footfall noise, and can also compensate for an excess of bass frequencies caused by the proximity effect. This enables the sE2200 to close-mic many instruments including electric guitar speaker cabinets, brass instruments and drums.
Reliable operation even in demanding applications in difficult environments is ensured by the roadworthy all-metal design, robust construction, and high-quality manufacturing standards.
- Features
Features
- Hand-crafted 1" true condenser capsule individually tuned in our own factory
- The same condenser microphone loved by an entire generation of engineers
- Traditional Class-A electronic design with consistent low-noise performance
- Custom-built output transformer and massively shielded all-metal housing
- 80 /160 Hz bass-cut filters and -10 / -20 dB pads
- Specification
Capsule Hand-crafted 1" True Condenser Polar Patterns Cardioid Frequency Range 20 Hz - 20 kHz Sensitivity 24 mV / Pa (-32.5 dBV) Max SPL 125 / 135 / 145 dB (0 / 10 / 20 dB pad) (0.5% THD @ 1kHz) Equivalent Noise Level 8 dB Dynamic Range 117 / 127 / 137 dB (0 / 10 / 20 dB attentuation pad) Signal to Noise Ratio 86 dB Low Cut Filter 80 / 160Hz, 6 dB/Oct, switchable Attenuation Pad 10 / 20 dB, switchable Powering 48 Volts according to IEC 61938 Electrical Impedance <50 Ohms Recommended Load Impedance >1k Ohms Current Consumption 4.2 mA Connectivity 3-pin male XLR connector Dimensions (L x Dia) 8.46" (215 mm) x 2.01" (51 mm) Weight 1.35 lbs (0.61 kg) - Documents
Documents
- In The Box
In The Box
- sE2200 Microphone
- sE Isolation Pack (Shock Mount, Pop Filter)
- Thread Adapter
- Reviews
Write Your Own Review