- Description
Details
The length (14.53") of the AT8035 Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording and other specialized uses. The microphone is designed for video production and broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. It operates on battery or phantom power.
- Features
Features
- Designed for video production and broadcast (ENG/EFP) audio acquisition
- Length is well-suited for ENG, outdoor recording and other specialized uses
- Provides the narrow acceptance angle desirable for long-distance sound pickup
- Excellent sound rejection from the sides and rear of mic
- Switchable low-frequency roll-off
- Operates on battery or phantom power
- RoHS compliant—free from all substances specified in the EU directive on hazardous substances
- Specification
Element Fixed-charge back plate, permanently polarized condenser Polar Pattern Line + gradient Frequency Response 40-20,000 Hz Low Frequency Roll-Off 80 Hz, 12 dB/octave Open Circuit Sensitivity Phantom: –38 dB (12.5 mV) re 1V at 1 Pa Battery: –39 dB (11.2 mV) re 1V at 1 Pa Impedance Phantom: 250 ohms Battery: 300 ohms Maximum Input Sound Level Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. Battery: 120 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range (Typical) Phantom: 110 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL Signal-To-Noise Ratio 72 dB, 1 kHz at 1 Pa Phantom Power Requirements 11-52V DC, 2 mA typical Battery Type 1.5V AA/UM3 Battery Current / Life 0.4 mA / 1200 hours typical (alkaline) Switch Flat, roll-off Output Connector Integral 3-pin XLRM-type Dimensions 369 mm (14.53") Long, 21 mm (0.83") Diameter Weight 1 lbs (170 g) - Reviews
Write Your Own Review