Rolls RA200 2-Channel 100 Watts/RMS Channel @ 4 Ohms Power Amplifier (Discontinued)

Name: Rolls RA200 2-Channel 100 Watts/RMS Channel @ 4 Ohms Power Amplifier (Discontinued)
Brand: Rolls Audio
SKU: ROLLS-RA200
Price: 345 USD
Availability: OutOfStock

Write a Review

Part #:

RA200

Model #:

RA200

Current Stock:

Availability: No Longer Available

Contact us for comparable solutions.

Certified Audio
Expertise

FREE Custom
System Design

Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112

The Rolls RA200 features two 100 watt RMS - 4 ohm outputs, a bridging switch, MOSFET drivers in a voltage and current gain circuit, one second power-up delay, and LED power output meters.

Description

The Rolls RA200 features two 100 watt RMS - 4 ohm outputs, a bridging switch, MOSFET drivers in a voltage and current gain circuit, one second power-up delay, and LED power output meters. The unit is housed in a painted steel chassis and includes a special high performance transformer and a fused power line. The MOSFET output stage is fault protected which allows the RA200 to forgive momentary output shorts, and has over-temperature protection. CAUTION: The RA200 is convection cooled. Adequate ventilation room for the heat sink fins on the rear panel must be provided.

Features

MOSFET drivers in a voltage and current gain circuit
1 second turn-on delay
LED power output meters
Fault protected outputs

Specifications

Power Output, Stereo	100 Watts RMS/ch. 4 ohms;70 Watts RMS/ch. 8 ohms
Bridged	200 Watts RMS 8 ohms
Input Connectors	1/4" TRS balanced and RCA
Output Connectors	1/4" and 5-way binding posts
Sensitivity
THD
S/N Ratio	106 dBU
Power Bandwidth	DC - 30 kHz +/- 1dB
Damping Factor	> 150
Slew Rate	100 Volts/microSecond
Phase Shift
Input Impedance	10 K ohms Balanced
Power	120 VAC 60Hz 2.5A, 230 VAC 50Hz
Dimensions(H x W x D)	19"(48.26 cm) x 3.5" (8.89 cm) 7.5" (19.05 cm)
Weight	12 lbs (5.44 kg)