Samson Servo 200 Power Amplifier

Home /
Samson Servo 200 Power Amplifier (Discontinued)

Description

Details

Perfect for installation sound, the servo 200 is ideal for powering small to medium sized speaker chains, as well as playback and studio monitors. The servo 200 amplifier features large 10-segment 3-color level LED meters and independent channel volume controls. The rear panel includes 1/4-inch balanced and RCA input connectors, as well as 5-way binding post and 1/4-inch speaker outputs. The Servo amp line also feature a 4-stage power protection circuitry that ensures optimal performance and protection of connected components.

Features

Features

100 watts per side at 4 ohms
200 watts bridged mono at 8 ohms
1/4-inch and RCA input connectors
5-way binding post and 1/4-inch outputs
Dual Rack Space Design
10-segment, 3-color Level LED meters
4-stage power protection circuitry

Specification

Stereo Both Channels Driven
8 Ohms	66 Watts x 2
4 Ohms	100 Watts x 2
Bridged Mono
8 Ohms	200 Watts
Signal to Noise Ratio (20Hz-20k)	102dB
Distortion (SMPTE-IM)	0.05%
Input Sensitivity @ 8 Ohms	1.24V (4dBu)
Voltage Gain	32dB
Output Circuitry Class	AB
AC Power
@ 1/8 Rated Power 4 Ohms, Max	0.4A
@ 1/3 Rated Power 4 Ohms, Max	1.1A
@ Rated Power 4 Ohms, Max	3.3A
Distortion
(Typical @ 4 Ohms) 20Hz-20kHz, 10dB Below Rated Power	0.01%
1kHz, Rated power	0.1%
Frequency Response	20Hz - 20kHz (@ 8 Ohms, 1 Watt, 20Hz-20kHz)
Damping Factor (400Hz)	280
Input Impedance	15 kOhm Unbalanced 30 kOhm Balanced
Input Clipping	10 Vrms (22dBu)
Cooling	Continuously Variable Speed, Fan Forced Air
Connectors (Each Channel)
Input	RCA Unbalanced and 1/4" (6.3 mm) TRS, Balanced
Output	5-Way Binding Post and 1/4" Phone
Controls	AC Power Switch, Channel 1 and 2 Volume
Indicators	Power on (Blue), Protection (Amber), Signal (Green) for Each Ch, Peak (Red) for Each Ch. Level: -24 dB, -20 dB, -16 dB, -12 dB, -8 dB, -4 dB, -2 dB. O, +2 dB and +4 dB (Peak)
Protection	Short Circuit, Thermal, Current Limit, DC Offset, Current Inrush, RF Protection, Turn On/Turn Off Muting
Power Requirements	115/230, 240VAC, 50/60Hz
Dimensions (H x W x D)	3.5" (89 mm) x 19" (483 mm) x 11.7" (297 mm)
Net Weight	15 lbs (6.82 kg)

Documents