sE Electronics sE2300 Studio Condenser Microphone with Switchable Polar Patterns and Isolation Pack
Usually arrives in 5-9 business days.
The sE2200 is the latest version of the fan-favorite condenser that put sE Electronics on the map many years ago with its smooth, polished sound for vocals, voiceovers, and numerous instrumental applications. Like its predecessors, the sE2200 is a high-quality condenser microphone intended for a wide range of studio applications, from vocals and spoken word to acoustic instruments to drums and beyond. Thanks to its hand-crafted large-diaphragm true condenser capsule, shielded custom transformer and class-A circuitry (no ICs here!) it delivers pristine, flattering sound quality, exceptionally low noise, and an even, well-balanced frequency response.
The electronics and the switchable attenuation pads ensure a high dynamic range, with high sound pressure level (SPL) handling capability and extremely low-noise components. The switchable low-cut filters eliminate rumble or footfall noise, and can also compensate for an excess of bass frequencies caused by the proximity effect. This enables the sE2200 to close-mic many instruments including electric guitar speaker cabinets, brass instruments and drums.
Reliable operation even in demanding applications in difficult environments is ensured by the roadworthy all-metal design, robust construction, and high-quality manufacturing standards.
| Capsule | Hand-crafted 1" True Condenser |
|---|---|
| Polar Patterns | Cardioid |
| Frequency Range | 20 Hz - 20 kHz |
| Sensitivity | 24 mV / Pa (-32.5 dBV) |
| Max SPL | 125 / 135 / 145 dB (0 / 10 / 20 dB pad) (0.5% THD @ 1kHz) |
| Equivalent Noise Level | 8 dB |
| Dynamic Range | 117 / 127 / 137 dB (0 / 10 / 20 dB attentuation pad) |
| Signal to Noise Ratio | 86 dB |
| Low Cut Filter | 80 / 160Hz, 6 dB/Oct, switchable |
| Attenuation Pad | 10 / 20 dB, switchable |
| Powering | 48 Volts according to IEC 61938 |
| Electrical Impedance | |
| Recommended Load Impedance | >1k Ohms |
| Current Consumption | 4.2 mA |
| Connectivity | 3-pin male XLR connector |
| Dimensions (L x Dia) | 8.46" (215 mm) x 2.01" (51 mm) |
| Weight | 1.35 lbs (0.61 kg) |
Model #:
Usually arrives in 5-9 business days.