Shure SV200 Vocal Microphone (Discontinued)
Usually arrives in 5-9 business days.
Ball-type, dual-impedance mic that provides excellent voice reproduction for speech or music pick-up.
Ball-type, dual-impedance mic that provides excellent voice reproduction for speech or music pick-up.
The Model 588SDX is a ball-type, dual-impedance, cardioid (unidirectional) dynamic microphone that provides excellent voice reproduction. Its spherical grille is a very effective wind and pop filter which is especially good when used for closeup vocal miking.
This microphone is highly suited for speech or music pickup in schools, churches, and meeting rooms. Its unidirectional polar pattern greatly reduces feedback problems, permitting operation closer than usual to loudspeakers without the annoying squeal or howl caused by feedback. The microphone is equipped with a lockable ON/OFF switch and an internal impedance selection socket located on the XLR connector for switching between high and low impedance. A slip-in swivel adapter is supplied for the convenience of stand-mounted use.
| Type | Dynamic (Moving Coil) |
|---|---|
| Frequency Response | 80 to 15,000 Hz |
| Polar Pattern | Cardioid (Unidirectional) Symmetrical About Axis |
| lmpedance | O Z: Microphone Rated Impedance is 150 Ω (270 Ω Actual) for Connection To Microphone Inputs Rated Low Impedance HI Z: Microphone Impedance is “High” for Connection to High-Impedance Microphone Inputs |
| Open Circuit Voltage* (LO Z) | – 55.5 dBV/Pa (1.7 mV) |
| Open Circuit Voltage* (HI Z) | – 37.0 dBV/Pa* (14.1 mV) *1 Pascal=94 dB SPL |
| Phasing | Positive Pressure on The Diaphragm Produces Positive Voltage on Pin 2 Relative to Pin 3 in Both Hi Z and LO Z Modes |
| Switch | Built-In On/Off Switch, Lockplate to Lock Switch On |
| Connector | Three-Pin Professional (Male XLR) Type |
| Cartridge Shock Mount | Internal Rubber Vibration-Isolator |
| Swivel Adapter | Positive Action, Break-Resistant, Adjustable Through 180° Slip-Out Removal for Handheld Use, Designed for Mounting on Stand with 5/8-In.–27 Thread |
| Case | Platinum Beige Enamel Die Casting with Platinum Beige Steel Grille |
| Dimensions (H x W x D) | 6.45" (160 mm) x 0.868" (15 mm) x 2.129" (52 mm) |
| Net Weight | 0.693 lbs (0.315 kg) |
Model #:
Usually arrives in 5-9 business days.