Skip to main content

Shure MX412S Microflex Gooseneck Microphone with Mute Switch

Part #:
MX412S/C
Model #:
MX412S
MSRP: $414.00
$296.00
Availability: Usually arrives in 5-9 business days. Please be aware that global supply shortages outside our control may interfere with our normal delivery times and product availability. For more information, email sales@proacoustics.com or call us at 888-256-4112.
Certified Audio
Expertise
FREE Custom
System Design
Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112

Get a Quote, Price or Support Fast!

We want to make contacting us as fast and as easy as possible. Please reach out if you have any questions or concerns about our products, system design, technical support, or orders.
Phone Monday - Friday
8:00 AM - 5:00 PM
1-888-256-4112
Email Contact us by email or
our simple form.
SEND EMAIL

The Shure MX412S Microflex Gooseneck Microphone brings a whole new meaning to the word flexible. Beyond their fully adjustable goosenecks lies a new level of flexibility the new Microflex interchangeable condenser microphone cartridge.

Description

The Shure MX412S Microflex Gooseneck Microphone brings a whole new meaning to the word flexible. Beyond their fully adjustable goosenecks lies a new level of flexibility the new Microflex interchangeable condenser microphone cartridge. The interchangeable cartridges offer wide frequency response and accurate sound reproduction for a broad variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the new Microflex product line for enhanced convenience and consistent sound. This 12" Gooseneck Microphone features attached XLR preamp, shock & flange mount, and a snap-fit foam windscreen.

Features

  • Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
  • Interchangeable cartridges provide the right polar pattern
  • Balanced, transformerless output for increased immunity to noise over long cable runs
  • Shock mount provides over 20 dB isolation from surface vibration noise
  • Locking flange mount for permanently securing microphone to lecterns, pulpits or conference tables
  • Snap-fit foam windscreen

Specifications

Frequency Response 50 to 17,000 Hz
Output Impedance 180 ohms actual (EIA rated at 150 ohms)
Sensitivity (At 1,000 Hz, open circuit voltage) -35.0 dBV/Pa (17.8 mV)
Maximum SPL (1 kHz at 1% THD, 1 k ohm load) 124.2 dB
Equivalent Output Noise (A-weighted) 28.0 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL) 66.0 dB
Dynamic Range at 1 k ohm load 96.2 dB; 100 dB at 0 gain
Common Mode Rejection 45.0 dB minimum
Preamplifier Output Clipping Level (1% THD) -6.0 dBV (0.5 V); -12 dBV at 0 gain
Polarity Positive sound pressure on diaphragm produces positive voltage on pin2 relative to 3 of output conn.
Power Requirements 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements Operating Temperature Range: -18 to 57 degrees C; Relative Humidity: 0 to 95%
Dimensions 12" (304.8 mm)
My Cart