Skip to main content

By Shure

Shure MXWANI8 Microflex Wireless 8-Channel Audio Network Interface with Dante (Discontinued)

Part #:
MXWANI8
Model #:
MXWANI8
Availability: No Longer Available
Contact us for comparable solutions.
Certified Audio
Expertise
FREE Custom
System Design
Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112

Get a Quote, Price or Support Fast!

We want to make contacting us as fast and as easy as possible. Please reach out if you have any questions or concerns about our products, system design, technical support, or orders.
Phone Monday - Friday
8:00 AM - 5:00 PM
1-888-256-4112
Email Contact us by email or
our simple form.
SEND EMAIL

The Shure MXWANI8 is an 8-channel audio network interface that connects and distributes Microflex® Wireless and Microflex® Advance™ to conference room AV networks.

Description

The MXWANI8 enables easy out-of-the-box system setup with no additional networking hardware required. With per-channel analog outputs, it is the central point for connecting and distributing Microflex Wireless systems and the Microflex Advance MXA910 ceiling array to conference room AV networks.

  • Works with Microflex Wireless and Microflex Advance devices equipped with Dante digital networked audio
  • Offers 8 block connector channel outputs, 2 block connector inputs, and a headphone output
  • Features power over Ethernet and networked control via Microflex Wireless Control Software
  • Includes MXWANI8, IEC cable, hardware kit, and user guide

Features

  • Four-port gigabit switch: Optimized port configurations for connection to the access point transceiver and networked charging stations, third-party control systems, and corporate networks
  • Ethernet connectivity: Send audio and control signals over long cable runs of up to 300 feet or anywhere over a corporate network
  • Power over Ethernet: Port 1 of the rear panel switch supplies power over Ethernet to the access point transceiver (APT) or MXA910 for simplified installation
  • Corporate uplink mode: Link to the corporate network for remote control of system settings while keeping audio off the network for security and to reduce bandwidth
  • Front panel controls: Mute or solo channels and set input/output levels easily from the front panel
  • PC / Mac software control: Access the Microflex Wireless Control Software from a networked computer for input/output levels and port configuration
  • Dante™ networking: Transports low-latency digital audio received from wireless microphones over Ethernet to any other Dante-equipped device
  • Headphone output: Solo audio signal on any channel

Specifications

Audio Frequency Response 20 Hz to 20 kHz (+1, −1.5 dB)
Dynamic Range (20 Hz to 20 kHz, A-weighted, typical)
Analog-to-Dante: 113 dB
Dante-to-Analog: 110 dB
Output Noise (20 Hz to 20 kHz, A-Weighted, typical)
Line: −84.5 dBV
Aux: −95.2 dBV
Mic: −106.5 dBV
THD+N
Polarity Non-inverting, any input to any output
Housing Steel; Extruded aluminum
Power Requirements 100 to 240 V AC, 50-60 Hz, 1 A
Operating Temperature Range −18°C (0°F) to 63°C (145°F)
Storage Temperature Range −29°C (-20°F) to 74°C (165°F)
Configuration Active Balanced
Impedance 310 Ω
Clipping Level (Minimum) Line: +26.2 dBV
Aux: +16.2 dBV
Mic: −3.8 dBV
Configuration Active Balanced
Impedance 10.6 kΩ
Clipping Level (Minimum) Line: +23.8 dBV,
Aux: +10.8 dBV
Headphone Output 6.35 mm (1/4”) TRS, 100 mW, 350 Ω, dual mono (will drive stereo phones)
AD/DA Converter 24-bit, 48 kHz
Latency (Estimated Nominal, ±0.1 ms) Analog-to-Dante: 0.21 ms
Dante-to-Analog: 0.24 ms + TN
Network Interface Four-Port Gigabit Ethernet Switch, Dante digital audio
Uplink Port (Port 4) Selectable, blocks multicast traffic
Power over Ethernet (PoE) Provided on Port 1 to power MXWAPT
Cable Requirements Cat 5e or higher, shielded, 100 m maximum between network devices
Network Addressing Capability DHCP, link-local, static
Dimensions (H x W x D) 1.7" (44 mm) x 19.0" (483 mm) x 14.4" (366 mm)
Weight 7.1 lbs (3.2 kg)

DOCUMENTS

My Cart