The ULXD1 is a wireless bodypack transmitter compatible with ULX-D Digital Wireless Systems.
With a rugged yet lightweight aluminum case, the ULXD1 delivers uncompromising audio quality and RF performance, AES 256-bit encryption for secure transmission, and advanced rechargeability options for professional sound reinforcement applications.
Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
| Audio Input Connector | 4-Pin male mini connector (TA4M) |
|---|---|
| Configuration | Unbalanced |
| Impedance | 1 Megaohm |
| Maximum Input Level, 1 kHz at 1% THD | Pad Off: 8.5 dBV (7.5 Vpp), Pad On: 20.5 dBV (30 Vpp) |
| Preamplifier Equivalent Input Noise | 120 dBV, A-weighted, typical (EIN), System Gain Setting = +20 |
| RF Output Connector | SMA |
| Antenna Type | 1/4 Wave |
| Impedance | 50 Ohms |
| Occupied Bandwidth | |
| Modulation Type | Shure Proprietary Digital |
| Power | 1 mW, 10 mW, 20 mW |
| Audio Frequency Response | 20 Hz to 20 kHz (±1 dB), flat |
| Operating Range | 300 ft (100 m) |
| Connector | 3-pin TQG |
| Gain Offset Range | 0 to 21 dB (in 3 dB steps) |
| Battery Type | Shure SB900 Rechargeable Li-Ion or AA batteries |
| Battery Runtime @ 10 mW | Shure SB900: >12 hours; Alkaline: 11 hours |
| Housing | Cast aluminum |
| Dimensions (H x W x D) | 3.4" (86 mm) x 2.6" (66 mm) x 0.9" (23 mm) |
| Weight (without Batteries) | 0.313 lbs (142 g) |
Usually arrives in 5-9 business days.
