The 110 SR-P Sheet Rock subwoofer, like its sister model the 110 TB (Tile Bridge) is a 250 mm (10”) down-firing drive unit mounted in a compact vented cabinet capable of 31 Hz @ -3 dB. Designed to flush mount into sheet rock ceilings, walls, or overhangs; in fact, in any position offering adequate clearance and suitable structural support.
The 110 SR-P cabinet is fitted with seismic tether points and comes with a sturdy pre-installation ring (110 SR-Ring) for safe and secure installation of the unit. (The pre-installation ring is available separately for new construction where the sheet rock installers arrive before the contractor.) Fire rating for the 110 SR is NFPA Grade A.
The 110 SR-P incorporates an 8” x 10” input module located on the side of the cabinet. The input module controls are easily accessed by removing the grille. The 110 SR-P remains serviceable and removable from the ground after installation.
The 110 SR-P can be ordered with a passive input module connected via barrier strip, or with a passive internal crossover (110 SR-PX). Both passive modules can be powered by a THP 60 Watt / 70 Volt line transformer for distributed systems (110 SR-P70 V and 110 SR-PX 70 V).
| Frequency Response | |
|---|---|
| Active | (-3dB)31Hz - 150Hz |
| Passive | (-3dB)41Hz - 150Hz |
| Rated Maximum SPL @ 1 m | 105dB (average) 111dB (peak) |
| Electronics | |
| Input | 3 pin XLR female; pin 2 positive |
| Sensitivity | 500mV for rated output |
| Low Pass Filter | Fixed 12dB/oct @ 130Hz, with variable 12dB/oct, 50 - 150Hz |
| High Pass Filter | Fixed 12dB/oct @ 80Hz |
| Amplifier Type | Class AB Mosfet |
| Amplifier Output Power | 200 Watts into 8 Ohms load |
| User Controls and Indications | Level, low pass frequency, bass boost. Pin 1 lift, phase +/- 180°,low pass, all pass, power on/off |
| Driver Complement | 10" (254 mm) bass unit |
| Enclosure | Direct radiating vented MDF |
| Connectors (Passive Modules) | Barrier strip |
| Finish | Textured Black |
| Dimensions | |
| 110SR ( H x W x D ) | 19.02” (483 mm) x 19.02” (483 mm) x 12.36” (314 mm) |
| 110SR Ring | 14.49” (368 mm) x 14.49” (368 mm) x 0.79” (19 mm) |
| Accessories | Pre-installation ring |
| Weight | 32.66 lbs (14.81 kg) |
Usually arrives in 5-9 business days.
