The MS-2002 is a complete 2-channel master station and system power supply (24 V DC, 2 Amps total power) in a single unit. You simply plug it into any AC power outlet from 100 to 240 volts, add a microphone or headset, connect intercom stations to the back panel, and you’re ready to communicate. It has combined 1-channel and 2-channel connectors, so you don’t have to add a separate breakout box if you want to mix 1-channel and 2-channel intercom stations. The MS-2002 fits in a standard 19-inch equipment rack and is one (1) rack unit high. The basic MS-2002 can communicate with two (2) intercom channels. This number can be increased by connecting optional EMS-4001 Expansion Stations. Each EMS-4001 adds four (4) additional channels, and up to four (4) of these expansion stations can be connected for a total of eighteen channels.

Speaker Station or Headset Station

Use the built-in speaker for listening and add an optional MCP-90 series gooseneck panel microphone for talkback. You can also turn off the speaker volume, and plug in headsets for private communication.

Voice Activated Microphone (VOX)

Separate controls adjust the voice activation level for the headset microphone and panel microphone inputs.

Public Address (PA) Output, with PA key

Use your intercom microphone to talk over a PA system.

Back-Lit Keys

Improves visibility in low-light.

Incoming Call Indications

Red flashing call light, with beep tone if desired.

Instantaneous Auto-Reset

Instantaneous Auto Reset (IAR), the newest technology in performance and safety, which uses a revolutionary new circuitry that dynamically monitors line fault conditions. Then, when the fault is removed, automatically brings individual power supply channels up.

Mic Kill Key

You can turn off all microphones on a channel to quickly clear the channel.

Program Input for Each Channel

Connect any line-level audio source for monitoring in the speaker or headset, or for routing to the intercom channel. The program audio to the channel can be set to interrupt while the MS-2002 operator is talking on the channel.

Binaural (Stereo) Listening with External Powered Speakers

You can connect external powered speakers and then monitor channel 1 and 2 as separate right and left audio.

Expandable

Add more channels by connecting optional EMS-4001 Expansion Stations. Each EMS-4001 adds four additional powered channels (up to eighteen channels).

Clear-Com Compatible.

• Speaker Station or Headset Station – Use the built-in speaker for listening and add an optional RTS MCP- 90 series gooseneck panel microphone for talkback. You can also turn off the speaker volume, and plug in headsets for private communication
• Voice Activated Microphone (VOX) – Separate controls adjust the voice activation level for the headset microphone and panel microphone inputs
• Public Address (PA) Output, with PA key – Use your intercom microphone to talk over a PA system
• Back-lit Keys – Improves visibility in low-light
• Incoming Call Indications – Red flashing call light, with beep tone if desired
• Instantaneous Auto-Reset – The newest technology in performance and safety, which uses a revolutionary new circuitry that dynamically monitors line fault conditions. Then, when the fault is removed, automatically brings individual power supply channels up
• Mic Kill Key – You can turn off all microphones on a channel to quickly clear the channel
• Program Input for Each Channel – Connect any line-level audio source for monitoring in the speaker or headset, or for routing to the intercom channel. The program audio to the channel can be set to interrupt while the MS-2002 operator is talking on the channel
• Binaural (Stereo) Listening with External Powered Speakers - You can connect external powered speakers and then monitor channel 1 and 2 as separate right and left audio
• Expandable – Add more channels by connecting optional EMS-4001 Expansion Stations. Each EMS- 4001 adds four additional powered channels (up to eighteen channels)
• Clear-Com Compatible

User Manual

Spec Sheet