Telex TR-240 RTS 2.4 GHz Wireless Intercom Beltpack with A4F Headset Jack (Discontinued)

Telex RTS TR-240 Wireless 2.4 GHz Intercom Beltpack

The Telex TR-240 beltpacks are designed for use with the BTR-240 wireless intercom system. These bodypacks have the ability to be configured in one of three operating modes: wireless, wired, or master wireless. In wireless (normal) mode, beltpacks communicate with each other using the base station as a relay. In wired mode, beltpacks turn off their wireless ability and communicate via Ethernet cable or through a building's existing Ethernet infrastructure. In master wireless mode, the beltpack acts as a mobile access point to provide wireless coverage for other beltpacks to communicate without an actual BTR-240 base station.

The TR-240 beltpack has a removable lithium-ion battery pack that provides up to eight (8) hours of uninterrupted operation. The battery pack can be charged directly in the case by plugging a power adapter into the beltpack or by placing the battery in the CHG-240 4-bay charger.

• License Free 2.4GHz, IEEE 802.11b WLAN technology
• Expand coverage using BTR-24 access points
• Multi-level security and audio encryption
• 2-wire and 4-wire intercom interface
• ClearScan channel selection
• Auto-select Electret or Dynamic microphone
• Choice of two (2) independent or simultaneous audio channels
• TR-240 beltpacks operate wired or wireless
• Eight (8) full-duplex beltpacks with virtually unlimited number of half-duplex beltpacks
• TR-240 beltpacks can operate as an access point
• Multiple antenna options and accessories
• Durable ABS construction
• Easy-to-read LCD indicates system status
• Removable Li-Ion batteries with wide temperature range and up to eight (8) hours of operation

Spec Sheet

Manual