| Power Source |
230 V AC, 50/60 Hz |
| Power Consumption |
600W (with rated output signal)
260W (according to EN60065) |
| Rated Output |
240W |
| Frequency Response |
50 Hz - 20 kHz 3± dB (at 1/3 rated output) |
| Distrotion |
0.7% or less (at rated output, 1 kHz) |
| S/N Ratio |
85 dB or more |
| Input |
Local Input: -50 dB (MIC)/-10 dB (LINE) (chargeable), 600 ohm, electronically balanced, removable terminal block (14 x 2 pins)
External amplifier input: 100 V line, removable terminal block (14 pins) |
| Output |
Speaker output 1 - 2: Max. (240 W) per output
Speaker output 3 - 6: Max. (120 W) per output
Speaker output 1 - 6: Total within 240 W, removable terminal block (14 pins)
Allowable minimum load: 500 ohms (20 W) at 100 V line for speaker line failure detection
Direct output: Direct output from internal or external amplifier, removable terminal block (16 pins) |
| VM Link |
Input: Connecting the VM-3240VA or VM-3360VA, RJ45 femal connector
Output: Connecting the VM-3240E or VM-3360E, RJ45 female connector
Maximum distance: 874.89 yr (800 m)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) |
| EXT PA Link |
Input: Connecting the VP-2241, RJ45 female connector
Maximum distance: 16.4' (5 m)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) |
| General Control |
Input 1 - 8: No-Voltage make contact input, open voltage: 24 V DC, short circuit current: 2 mA or less, removable terminal block (14 x 2 pins)
Output 1 - 8: Isolated open collector output, withstand voltage: 30 V DC, operating current: 10 mA or less, removable terminal block (14 x 2 pins) |
| Emergency Control |
Input 1 - 5: No-Voltage make contact input, open voltageL 24 V DC, short-circuit current: 2 mA or less, RJ45 female connector
Input 6: Isolated voltage input, InactiveL -24 V ±20%, Active: +4 V ±20%, RJ45 female connector
Status out: Relay contact output, withstand voltage: 40 V DC, operating current: 2 - 300 mA, RJ45 female connector |
| ATT Control |
Relay contact 1-6, 125 V AC or 30 V DC, total under 5 A, removable terminal block (16 pins) |
| Power Input/Output |
Power in: Connecting the VX-2000DS only (operating range: 20 - 40 v DC)
PS out: 28 V DC/18 A
M4 screw terminal, distance between barriers: 0.43" (11 mm) |
| DC24V Output |
24 V DC, Maximum feeding current 0.3 A |
| DS Link |
Connecting the VX-200DS, RJ45 female connector
Maximum distance: 16.4' (5 m)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) |
| Operating Temperature |
25 F (-5 C) to 113 F (+45 C) |
| Operating Humidity |
5% to 95% RH (no condensation) |
| Finish |
Panel: Aluminum, hairline, black
Case: Surface-treated steel plate, black, paint |
| Dimensions (H x W x D) |
5.22" (132.6 mm) x 18.98" (482 mm) x 16.02" (407 mm) |
| Weight |
36.38 lbs (16.5 kg) |
