Traynor YCV40 Tube Guitar Combo Amplifier
Usually arrives in 5-9 business days.
The Traynor YCV80 Tube Guitar Combo Amplifier has two tone-shaping controls that give players unprecedented tonal variety for nearly any vintage tube tone. A 'Scoop' switch on the lead channel adds body for much heavier leads while the 'Expander' switch on channel two equalizes certain frequencies to create crystal clear new rhythm sounds.
When the Custom Valve 40 was getting rave reviews in the all-tube combo amp market, Traynor responded to the demand by expanding the line with the addition of the 2x12" Celestion loaded combo Custom Valve 80 - YCV80.
The Traynor YCV80 Tube Guitar Combo Amplifier has two tone-shaping controls that give players unprecedented tonal variety for nearly any vintage tube tone. A 'Scoop' switch on the lead channel adds body for much heavier leads while the 'Expander' switch on channel two equalizes certain frequencies to create crystal clear new rhythm sounds - often simulating an acoustic-like tone from an electric guitar.
A parallel effects loop with separate input and output trim pots for better overall effects control and a series effects loop (or loop through) between the tube pre-amp and tube power stage give the performer more flexibility over the signal path than found on other amplifiers.
| Type | Tube Guitar Amplifier |
|---|---|
| Cabinet Program Power (Watts) | 80 |
| Cabinet Impedance (Ohms) | 4 |
| Minimum Impedance (Ohms) | 2 |
| Speaker Configuration - LF (Size / Power) | 2 x 12 inch Celestion 70/80 |
| Inputs | 2 |
| Channel 1 - inputs | 1/4 inch phone |
| Channel 1 - controls | Gain, Volume,Treble, Mid, Bass |
| Channel 1 - switches | Boost, Scoop |
| Channel 2 - inputs | Shares Ch 1 input |
| Channel 2 - controls | Volume, Treble, Mid, Bass |
| Channel 2 - switches | Channel Select, Brightness, Expander |
| Line Out (type / configuration) | Speaker Compensated XLR Balanced |
| Effects Loop / Location | Yes / Rear |
| Effects Footswitch / Function | Yes / Channel Select, Boost |
| Internal Reverb / Effects | Accutronics Spring Reverb |
| External speaker output / location | Yes / Rear |
| Other Features | Standby Switch, Auto tube matching circuit, DC filaments on preamp tubes |
| Dimensions (H x W x D) | 20" (510 mm) x 26.5" (670 mm) x 9.5" (240 mm) |
| Weight | 65 lbs (29 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.