Williams Sound DL107 SYS D Medium Area Induction Loop System with Network Control and Dante Input

Home /
Williams Sound DL107 SYS D Medium Area Induction Loop System with Network Control and Dante Input

Description

Details

Williams Sound DL107 SYS D Medium Area Induction Loop System with Network Control and Dante Input

The Williams Sound DL107 SYS D medium-area system offers DSP audio processing, calibration tools for ease of installation, audio override, pink noise generator, and the option of a local or PC app configuration.

Single output (7 amps). Ideal for perimeter and single array installations.

Features

Features

Network control - allows control and calibration of unit remotely with application software
High continuous current 9.5 Arms (13.4 Apk) per output continuous
LCD Screen with VU metering, easy one-button menu control
DSP Audio Processing
Dante™ Input ("D" models)
USB for firmware updates
Input mixing, parametric equalization, compression, metal compensation, high and low-pass filters, AGC and audio delay
Power-save mode
Adjustable output delay for multiple amps in large venues
Fault warning and active protection against shorted or open circuits and overheating
Loop fault relay output
XLR and 3-position terminal block input configurable as microphone input or line-input, balanced or unbalanced
Standard 1 RU, 19" rackmount
Magnetic signal couples directly to devices equipped with telecoils (T-coils) such as hearing aids, cochlear implants, or optional loop receivers
DL207 suitable for phased-array or dual-loop systems; DL107 suitable for perimeter loop or single array
Phased-array mode automatically produces 90° phase shift in slave loop output
Meets IEC 60118-4 system performance requirements when integrated into a correctly designed and installed system
Meets IEC Specification 60118-4 (when designed and commissioned properly)
Tested to IEC Specifications 62489-1 Benchmark Standards

Specification

Fan Cooling	Variable Speed, Temperature Controlled
Power Supply	Internal, Universal 100 - 240 VAC, 50/60 Hz, 200W Fuse: 5 x 20 mm, 5 A, 250 V AC power plug is IEC 320-C14
Heat Output @ 120 VAC	DL107 : Sleep State: 63 BTU/hr Idle State: 71 BTU/hr Driving one loop @ 9.5 A: 339 BTU/hr
Ethernet	(1x) RJ-45; 10 - 100 MBps.
USB	(1x) standard-B USB 1.1, 2.0 or 3.0 supported
Environment	0 - 35° C ( 32 - 95° F), 0 - 90% relative humidity
Coverage Area	DL107 (single output amplifier): 15,000 sq. ft. (1,393 sq. m.) (Perimeter Loop, 3:1 aspect ratio) 9,000sq. ft. (836 sq. m.) (Perimeter Loop, 1:1 aspect ratio)
Dante Input	On "D" models only (1x) RJ-45;100 Mbps,/br>Minimum latency: 2 ms Audio sample rates supported: 44.1, 48 kHz Resolution: 24 bits
Line Inputs	(1x) 3-position terminal block, 10 kΩ input impedance Configurable/accepts -10 dBV, -4 dBu, +4 dBu, +8 dBu, balanced or unbalanced Level adjustable 0 to -96 dB
Mic/Line Inputs	(1x) XLR 3-pin jack Input impedance: 1.5 kΩ Mic, 10 kΩ Line Configurable/Accepts: Mic, Line -10 dBV, Line +4 dBu, or Line +8 dBu, balanced or unbalanced Phantom supply (24V)
70 - 100 V Input	(1x) 2-position terminal block; high/speaker-level input (accepts 25 V, 70 V or 100 V) from distributed audio/paging systems
Line Outputs	(1x) 3-position terminal block; loop-through of Mic/Line Input 1 & Line Input 2, +4 dBu, balanced or unbalanced The line outputs mirror the audio of the loop output
Loop Output(s)	(1x) 2-position terminal block per output
Audio Output Delay	Adjustable from 0 to 165 msec
Headphone Output	(1x) 1/4" stereo headphone jack, on front of unit Monitored input or output selectable in menu
Loop Fault Relay	(1x) 3-position terminal block providing NC, NO and Common Contact rating: 2.0 A @ 30 VDC
Loop Output Drive Voltage	16.1 Vrms (22.8 Vpk) continuous
Rated Loop Output Current	9.5 Arms (13.4 Apk) per output
Loop Resistance Range	0.5 Ω to 3.0 Ω (DC)
Rated Load	0.5 Ω DC with 135 µH inductance
Frequency Response	45 Hz to 9.0 kHz ± 2 dB (1 kHz ref.)
Rated loop THD	<1 % at rated output current (1 kHz sine wave)
Dimensions (H x W x D)	1.75" (44.45 mm) x 19" (482.6 mm) x 10" (254 mm)
Weight	9.2 lbs (4.2 kg)

Documents

Documents

Spec Sheet

Manual

Quick Setup Guide

In The Box

In The Box

(1) DL107 NET DSP Induction Loop Amplifier
(2) PLR BP1 Body-Pack Receivers with Batteries
(2) EAR 013 Single Mini Earbuds
(1) BAT KT6 Dual Drop-In Charger Kit (Includes CHG 3502 Dual Drop-In Charger and (2) BAT 026-2 AA NiMH Batteries)
(1) PLW F300 300 ft. Roll of Flat Power Loop Wire
(2) FWT 001 Rolls of Flat Wire Warning Tape
(1) IDP 009 ADA Wall Plaque (T-Coil)

Reviews