Williams Sound DW SY2 Digi-Wave Wireless Intercom Bridge with DLT 300

Home /
Williams Sound DW SY2 Digi-Wave Intercom Bridge with DLT 300 Transceiver (Discontinued)

Description

Details

Williams Sound DW SY2 Digi-Wave Wireless Intercom Bridge

The DW SY2 Digi-Wave intercom bridge is ideal for use in event production where full-duplex communication is desired between non-mobile and mobile crew members in the same venue. This wireless intercom add-on allows you to expand an existing Clear-Com® system to include wireless, full-duplex Digi-Wave DLT 300 transceivers from Williams AV. It supports up to six open microphones simultaneously and an unlimited number of Digi-Wave devices in a given area. Up to 750 feet (228 meters) range, depending on the environment.

The DLT 300 Digi-Wave transceiver features full-duplex capability for more natural conversations. It provides secure, crystal-clear audio and is slim, lightweight, and simple to set up and use. 1- or 2-way operation offers flexibility in an array of applications. With the push of a button, users can access two-way communication for immediate interaction or Q&A.

Features

Features

Ideal for use in event production
Aids in providing full-duplex communication between non-mobile and mobile crew members
Expands an existing Clear-Com 2-wire intercom base system
Supports up to six simultaneous open microphones and an unlimited number of Digi-Wave devices in a given area
Included WCA 127 interface cable features a proprietary 30-pin connector (for compatibility with a DLT 300) splitting to an XLR 4-pin female jack and a female power port, which allows hook-up of the included power supply

Specification

ADP 903 2 to 4 Wire Adapter
Power Requirements	24-30V DC at 15mA from comms system
External Input	-60 to +30dBm into 10kO nominal, balanced and floating
External Output	-60 to +18dBm into 10kO nominal, balanced and floating
Connection (4-wire)	Via XLR 4 pin male socket
Connection (2-wire intercom ring)	Via XLR 3 pin male and female(loop-through)
Controls To Adjust	Mic/Line switches and 10 turn potentiometer to adjust external system input and output levels
Dimensions	2.1" (55 mm) x 3.6" (93 mm) x 4.3" (110 mm)
Weight	420 g
DLT 300 Digital Transceiver
Color	Black/Silver (Front/Back)
Case Material	Black ABS plastic
Battery Type	Lithium Polymer with smart charge built into transceiver; 2000 mAH
Power Save	Auto Sleep Mode after 5 minutes of no RF signal from compatible devices
Charge Time	5 hrs. TFP 045 with cable and international adapters
Optional Chargers	2-bay CHG 102, 12-bay CHG 1012, TFP 045
Simultaneous Channels/Groups/Talkers	Up to 15 simultaneous channels (0-14) (Interpretation mode) Up to 4 simultaneous groups (2 way mode) Up to 4 simultaneous talkers per group (2-way mode) Up to 6 simultaneous talkers per group (2-way Intercom mode)
Operating Frequencies	2.4 GHz (ISM band); 2402 - 2476 MHz FHSS
Audio Frequency Response (-3dB Knee Level)	Conference Mode, Interpreter Mode: 140 - 11.5 KHz Intercom Mode: 140 - 7.6 KHz
SNR	74 dB (A-weighted, Maximum output)
THD	0.33%
Microphone Input	Internal microphone (disabled when MIC jack engaged) and 3.5 mm phone jack (tip/sleeve) with electret microphone bias, adjustable gain with 63dB range
Headphone Output	3.5 mm phone jack; 33 Ω load
Audio Output	Max SSPL 90 111.8dB (EAR 013), 116.8dB (EAR 041) Internal speaker (disabled when haedphone jack in use) <20mW @ 10% THD/RL = 33Ω
Range	Up to 750 ft (229 m) (depending upon environmental conditions)
Modulation	FSK
RF Output	14 dBm Typical
Security	87 bit encryption, Secure Key Code, Setup Lock (SLOC)
Controls	Front panel push buttons for volume up/down, group select, menu access and selection, timer, time, MIC on/off, power on/off, tone control SLOC access and Secure Key access. System reset button (rear panel)
Outputs	3.5 mm stereo/mono headphone jack 30 pin charging jack with audio out to base stations
Side Tone	-12 dB below volume, tone variation [ST:0 = Off, ST:1 = -6 dB, ST:2 = -12 dB]
Indicators	LCD (Group, channel, volume level, battery status, mode, number of people with talk button on)
LED’s	(charge status) Red LED around talk button when enabled
Docking Connector	30-pin Connector for charging and audio in/out
Compatible Receiver	DLR 360 only
Approvals	FCC, Industry Canada, CE, RoHS, WEEE, RCM
Warranty	2 years parts and labor (90 days on accessories); 6 months on internal battery

Documents