Williams Sound DWS INT 4 2.0 Digi-Wave Language Interpretation System (Discontinued)

Part # DWS INT 4 2.0
Model # DWS INT 4 2.0

The Williams Sound DWS INT 4 2.0 Digi-Wave Language Interpretation System is a completely portable, wireless, single-speaker, 2-language interpretation system. Ideal when security, sound quality and flexibility are critical.

Description

Details

The Williams Sound DWS INT 4 2.0 Digi-Wave Language Interpretation System is a completely portable, wireless, single-speaker, 2-language interpretation system. Ideal when security, sound quality and flexibility are critical. Designed for small - to medium-size conferences, meetings or other events where one language is shared by two interpreters. System can serve up to 25 listeners. Additional DLT 100 2.0's can be purchased separately to accommodate up to 14 additional  languages. Additional DLR 60 2.0's can be purchased separately to accommodate additional listeners. Can serve unlimited number of listeners within recommended range.

One DLT 100 2.0 transceiver is set up as body-worn transmitter to provide a direct audio feed from speaker to two interpreters.  Interpreters 1 and 2 then use second and third DLT 100 2.0's to both listen to the speaker and take turns transmitting their simultaneous interpretation to the audience on a separate channel.  The audience, using DLR 60 2.0's, can also tune in to Ch. 0 for hearing assistance (they can toggle back and forth between CH 0 for floor speaker and CH 1 for interpreted language).

The interpreters can work together by "spelling" each other (giving each other a break), interpreting into the same language for long jobs. Each interpreter must toggle on/off by pushing the TALK button – leaving only one TALK button on at any one time.

Features

Features

  • Can accommodate floor (or common) language, plus up to 14 languages
  • Quick set-up
  • No base station, console or mixing board needed.
  • Lightweight — saves on shipping costs
  • Expandable solution — can grow with your needs
  • 2.4GHz operation — legal for use in most countries
  • All-day operation on a single, full charge
  • Any number of listeners (with DLR 60 2.0 receivers)
  • IC-2 Interpreter’s Control Console(s) also can be integrated for interpreter’s booth.
Specification
CHG 102 Digi-Wave 2-Bay Charger
Power input110—240V AC @ 50-60 Hz
Power output5 volts DC @ 1.2 amps
Cable length6’ (1.8 meters)
EAR 022 Earphones
StyleAround-ear speaker
Plug3.5mm mono
Cord39”
Driver Size23 mm
Nominal Impedance32Ω
Freq. Response20 - 20kHz
Max Power Input30 mW
Sensitivity118 dB @ 1kHz
Weight0.03 lbs (0.02 kg)
MIC 044 2P Headset Microphone
ColorBlack
Plug2 x 3.5mm
Cord39"
Phantom PoweredNo
Nominal Impedance32Ω
Freq. Response150 - 18kHz
Pick-Up PatternCardiod
Transducer TypeElectret Cond
Sensitivity105dB EAR
Replacement WindscreenWND 008
Replacement EarpadEAR 035
Weight0.163 lb (0.07 kg)
MIC 054 Directional Lapel Microphone
ColorBlack
Plug3.5mm mono
Cord39"
Phantom PoweredNo
Nominal Impedance600Ω @ 1kHz
Operating Voltage1 - 10 VDC
Freq. Response80 - 18kHz
Pick-Up PatternUni-direct
Transducer TypeElectret Cond
Sensitivity-68dB ± 4dB
Replacement WindscreenWND 007
Replacement Lapel ClipCLP 090
Weight0.04 lb (0.02 kg)
Digi-Wave DLT-100 2.0 Transceiver
ColorBlack and silver
EnclosureShatter resistant PC/ABS plastic
Battery typeLi Polymer with smart charge built into transceiver
Battery lifeUp to 14hrs talk time per charge
Charge time5hrs. TFP 045 with cable and international adapters, Optional two-bay charger CHG 102
ChannelsUp to 15 simultaneous channels (Interpretation mode), Up to 4 simultaneous groups (2 way mode)
Operating frequencies2.4GHz (ISM band) 2.402 – 2.476GHz FHSS
Frequency response150 – 11KHz
S/N ratio69dB (A weighted)
69dB (A weighted)0.33 %
Microphone inputInternal microphone (disabled when MIC jack engaged)
Microphone input3.5mm stereo jack (tip/sleeve) with electret microphone bias, adjustable gain with 63dB range
Audio outputMax SSPL 90 111.8dB (EAR 013), 116.8dB (EAR 041)
Audio outputInternal speaker (disabled when ear jack engaged)
Audio output16mW @ 33Ω
RangeUp to 100ft outdoors and 200ft indoors
ModulationGFSK, binary CDMA
RF output14dBm Max
Security code87 bit encryption
ControlsFront push buttons for volume up/down, quick group select, menu access and selection
ControlsMIC on/off, power on/off, tone control, side-tone adjustment, SLOC access and Secure Key access
ControlsSystem reset button (rear of unit)
Output3.5mm stereo/mono jack 30 pin charging jack
Side toneAdjustable: Off (0dB), -6dB, -12dB below volume
SpeakerInternal speaker (disabled when ear jack is engaged)
IndicatorsLCD (Group, channel, volume level, battery status, mode, signal strength)
LED’s (charge status, voting)Red LED around talk button when enabled. Amber LED signifying voting feature activated
Maximum presentersTwo presenters at any given time
Dimensions
(H x W x D)
4.1" (103 mm) x 2.4" (62 mm) x 0.4" (11 mm)
Weight0.18 lbs (0.08 kg) including battery
DLR 60 2.0 Receiver
Frequency Band2.4 GHz (ISM band)
ModulationGFSK digital transmission
RangeUp to 100 ft outside, Up to 200 ft inside
Multi ChannelUp to 15 simultaneous channels (one way mode)
Case MaterialBlack ABS Plastic
Battery LifeAlkaline Disposable (BAT 010-2): Up to 27 hrs; NiMH Rechargeable (BAT 022-2): Up to 21 hrs
Battery Type2 x AAA Alkaline or NiMH
Power SaveAuto Sleep Mode after 5 min of no RF signal
Frequency Response150 Hz – 11 kHz
S/N Ratio65 dB (A weighted)
THD0.45%
AntennaInternal
Output60 mW; 3.5 mm stereo jack with mono output for headphones / Earphones; Back Speaker
ControlsPower, Volume +/-, Channel +/-, Setup, Battery Type
DisplayLCD shows status: Battery Level, RSSI, Group/Channel#
IndicatorsRed LED - blinks when charging; Green LED - stays on when charged
Docking Connector30-pin iPod Style for charging and audio out
Compatible TransmitterDLT 100
Temp. Range32° – 122°F (0° to 50°C)
ChargersCHG 102, CHG 1012, Digi-Dock
Dimensions
(H x W x D)
3.54" (90 mm) x 2.36" (60 mm) x 0.63" (16 mm)
Weight0.11 lb (0.05 kg)
In The Box

In The Box

  • (3) DLT 100 2.0 transceivers
  • (25) DLR 60N 2.0 receivers
  • (25) BAT 010-2 AAA alkaline batteries
  • (1) MIC 054 directional lapel microphone
  • (2) MIC 044 2P headset microphones
  • (25) EAR 022 earphones
  • (1) CCS 044 silicone skin
  • (1) CHG 102 Digi-Wave 2-bay charger
  • (1) CCS 042 DW system carry case
Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: Williams Sound DWS INT 4 2.0 Digi-Wave Language Interpretation System (Discontinued)