Williams Sound DWS INT 5 PRO Digi-Wave Language Interpretation System (Discontinued)

Part # DWS INT 5 PRO
Model # DWS INT 5 PRO

The Williams Sound DWS INT 5 PRO Digi-Wave Language Interpretation System is a completely portable, wireless, single-speaker plus 4-language interpretation system.

Description

Details

The Williams Sound DWS INT 5 PRO Digi-Wave Language Interpretation System is a completely portable, wireless, single-speaker plus 4-language interpretation system. Ideal for up to four languages, plus floor.  Up to 50 listeners.  Space for up to 70 receivers per tray.  Ideal when security, sound quality and flexibility are critical. Designed for small - to medium-size conferences, meetings or other events where one language is shared by four interpreters. System can serve up to 50 listeners. Additional DLT 100 2.0's can be purchased separately to accommodate up to 14 additional languages. Additional DLR 60 2.0's can be purchased separately to accommodate additional listeners. Can serve unlimited number of listeners within recommended range.

The DWS INT 5 PRO is ideal for a one floor / four interpreter scenario. One DLT 100 2.0 transceiver is set up as body-worn transmitter to provide a direct audio feed from a speaker to four interpreters. Interpreters 1, 2, 3 and 4 then use DLT 60 2.0's to both listen to the speaker and transmit their simultaneous interpretation to the audience on 4 separate channels.  The audience, using DLR 60 2.0's, can tune in any of these channels (they can toggle back and forth between CH 0 for floor speaker and CH 1-4 for interpreted languages).

Features

Features

  • Can accommodate floor (or common) language, plus 4 languages (expandable up to 14 languages)
  • Quick set-up
  • No base station, console or mixing board needed.
  • Lightweight — saves on shipping costs
  • Expandable solution — can grow with your needs
  • 2.4GHz operation — legal for use in most countries
  • All-day operation on a single, full charge
  • Any number of listeners (with DLR 60 2.0 receivers)
  • IC-2 Interpreter’s Control Console(s) also can be integrated for interpreter’s booth
Specification
DLT 100 2.0 Transceiver
ColorBlack and silver
EnclosureShatter resistant PC/ABS plastic
Battery TypeLi Polymer with smart charge built into transceiver
Battery LifeUp to 14 hrs talk time per charge
Charge Time5 hrs. TFP 045 with cable and international adapters
ChannelsUp to 15 simultaneous channels (Interpretation mode); Up to 4 simultaneous groups (2 way mode)
Operating Frequencies2.4GHz (ISM band) 2.402 – 2.476GHz FHSS
Frequency Response150 – 11KHz
S/N Ratio69 dB (A weighted)
THD0.33 %
Microphone InputInternal microphone (disabled when MIC jack engaged) and 3.5mm stereo jack
Audio OutputMax SSPL 90 111.8dB (EAR 013), 116.8dB (EAR 041). Internal speaker. 16mW @ 33Ω
RangeUp to 100ft outdoors and 200ft indoors
ModulationGFSK, binary CDMA
RF Output14 dBm Max
Security Code87 bit encryption
ControlsFront push buttons for volume up/down, quick group select, menu access and selection, MIC on/off,
Output3.5mm stereo/mono jack 30 pin charging jack
Side ToneAdjustable: Off (0dB), -6dB, -12dB below volume
SpeakerInternal speaker (disabled when ear jack is engaged)
IndicatorsLCD (Group, channel, volume level, battery status, mode, signal strength)
LED’sCharge status, voting-Red LED around talk button when enabled; Amber LED-voting feature activated
Maximum PresentersTwo presenters at any given time
Dimensions
(H x W x D)
4.1" (104 mm) x 2.4" (61 mm) x 0.4" (10 mm)
Weight0.18 lb (0.08 kg)
DLR 60 2.0 Receiver
Frequency Band2.4 GHz (ISM band)
ModulationGFSK digital transmission
RangeUp to 100 ft outside, Up to 200 ft inside
Multi ChannelUp to 15 simultaneous channels (one way mode)
Case MaterialBlack ABS Plastic
Battery LifeAlkaline Disposable (BAT 010-2): Up to 27 hrs; NiMH Rechargeable (BAT 022-2): Up to 21 hrs
Battery Type2 x AAA Alkaline or NiMH
Power SaveAuto Sleep Mode after 5 min of no RF signal
Frequency Response150 Hz – 11 kHz
S/N Ratio65 dB (A weighted)
THD0.45%
AntennaInternal
Output60 mW; 3.5 mm stereo jack with mono output for Headphones / Earphones; Back Speaker
ControlsPower, Volume +/-, Channel +/-, Setup, Battery Type
DisplayLCD shows status: Battery Level, RSSI, Group/Channel#
IndicatorsRed LED - blinks when charging; Green LED - stays on when charged
Docking Connector30-pin iPod Style for charging and audio out
Compatible TransmitterDLT 100
Temp. Range32° – 122°F (0° to 50°C)
ChargersCHG 102, CHG 1012, Digi-Dock
Dimensions
(H x W x D)
3.54" (90 mm) x 2.36" (60 mm) x 0.63" (16 mm)
Weight0.11 lb (0.05 kg)
MIC 058 Dual-Headset Microphone
TypeUnidirectional electret
Sensitivity-80 dB
Frequency Response100-12 kHz
Impedance150 Ω
Operating Voltage1-10 VDC
Headphones
Driver Type50 mm, dynamic
Frequency Response10 Hz-20 kHz
Impedance46 Ω
Max SPL Out96 dB
Max Power Input100 mW
PlugsDual 3.5 mm
Replacement Mic ScreenWND 058
Replacement EarpadsEAR 058
EAR 022 Earphones
StyleAround-ear speaker
Plug3.5 mm mono
Cord39”
Driver Size23 mm
Nominal Impedance32Ω
Frequency Response20 - 20kHz
Max Power Input30 mW
Sensitivity118 dB @ 1kHz
Weight0.03 lb (0.02 kg)
In The Box

In The Box

  • (5) DLT 100 2.0 transceivers
  • (50) DLR 60 2.0 receivers
  • (50) BAT 022-2 AAA NiMH rechargeable batteries
  • (4) MIC 058 dual-headset microphones
  • (50) EAR 022 surround earphones
  • (1) CHG 1012 12-bay, drop-in charger
  • (1) CCS 049 heavy-duty carry case
  • (4) CCS 044 BK silicone skins (Black)
  • (1) CCS 044 GR silicone skin (Gray)
Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: Williams Sound DWS INT 5 PRO Digi-Wave Language Interpretation System (Discontinued)