- Description
Details
The cutting-edge Williams Sound PPA T45 NET D transmitter offers control or monitoring capability from any remote location, Dante™ input, multiple digital audio input options, and an OLED high-resolution screen with easy-to-manage menu navigation. Features 3 powerful microprocessors and the same high-quality audio and RF performance you've come to expect from Williams Sound. It's technology that takes the guesswork out of complex audio installation. Simply select among voice, music, or hearing assistance in the application preset menu, and this transmitter quickly configures itself. With a range of up to 1000 feet, the PPA T45 NET D is ideal for large venues where superior coverage is essential.
- Features
Features
- Dante™ input
- Network Control Capability via ethernet (10-base-T) using any web browser
- Multiple Digital Audio Inputs (AES, SPDIF) provide direct connection to digital signal sources
- OLED high-resolution screen with simplified menu navigation, offers comprehensive and convenient access to full system functions
- DSP Audio Processing
- Sleek and stylish new design
- Simple set-up and operation
- 1000' operating range
- OLED display, push-button menus
- Microprocessor controlled
- Adjustable RF power output
- Combo XLR, 1/4" TRS inputs
- Lifetime PLUS Limited Warranty (90 days on accessories)
- Specification
Rack Mount Standard 19" Rack, one EIA rack space high, 1/2 space wide1–2 units can be mounted in a single rack space with optional RPK 005 (single) or RPK 006 (double) Rack Mount Kits Power Supply Desktop Style Transformer (TFP 048)Input: 100 - 240 VAC, 50/60 Hz. IEC Line CordOutput: 24 VDC, 750 mA, 18W. 2.5mm ID center positive barrel connectorApprovals: UL, CUL, Energy Star V, CSA listed Power ON Indicator Push On/Push Off latching power button, backlit green indicates power ON, backlight off indicates power OFF, fading from bright to dark indicates Sleep Mode Temperature Range Operating: +32° F to +104° F (0° C to 40° C)Storage: -4° F to +158° F (-20° C to 70° C) Operating Frequencies 72.1-75.9 MHz , 17 wideband channels (selectable) Frequency Accuracy ± 2 ppm stability, 0 - 50˚ C Deviation ± 75 kHz maximum Pre-Emphasis 75 µsec RF Field Strength Does not exceed 80 mV/m at 3 m Compatible Antennas ANT 005, ANT 021, ANT 024, or ANT 025 Transmission Range Up to 1000 ft (304 m) with ANT 005 coaxial antenna mounted on rear chassis connector RF Time-out (Sleep Mode) Menu selectable - 30 Min, 4 Hours, or Always OnTimer starts when audio is below the -21dB VU level and no buttons are pressed RF Power Menu selectable - Full, Medium, Low, Off RF Outputs (1x) #10-32 stud connector in center of unit (pcb mounted)(1x) F-connector on rear chassis RF Transmit Indicator 1 Green LED, indicates RF "On Air" Audio Processor Functions DSP based; Compression: 1:1, 1.5:1 or 2:1; High Pass and Low Pass Filter Frequency control Frequency Response 31 - 16000 Hz, ±3 dB ("Music" Audio Preset) Signal-to-Noise Ratio ≥74 dB Transmitted RF Total Harmonic Distortion Less than 0.25% @ 1 kHz (RF output) Common Mode Rejection >57 dB @ 1 kHz, Mic or Line Audio Inputs (1x) Combination 3-pin XLR, 1/4" (TRS) jack for Mic or Line Level Analog Audio, Balanced or Unbalanced Line Level, or Microphone with Selectable Phantom Power(1x) XLR for Digital Audio, AES3/EBU, supported sample rates 44.1 kHz and 48 kHz(1x) RCA for Digital Audio, S/PDIF, supported sample rates 44.1 kHz and 48 kHz Audio Input Gain Adjust In menu, adjustable to 0 to -50 dB, in 1dB steps Phantom Power 14.4 VDC applied through 2.2 kΩ resistors to analog combo jack: Pin 2 and Pin 3 on XLR jack, or tip and ring on 1/4" TRS jack Audio Level Indicators 10-LED array that reads -18 to +9 dB at 3 dB intervals. 7 Green, 2 Amber, and 1 red LED. Green LEDs indicate normal operating audio level peaks, Amber LEDS indicate close to overload peaks, Red LED indicates overload peaks Microphone -55 dBV (1.7 mV RMS)-15 dBV (180 mV RMS)+20dBV (10.0 V RMS) Line -25 dBV (55 mV RMS)+16 dBV (6.3 V RMS)+20 dBV (10.0 V RMS) Headphone Output 1/4" TRS stereo jack, mono signal, 15.7 mW, maximum in 33 Ω (level adjustable in menu 0 to -40 dB in 2 dB steps) Line Output RCA jack (black), -10 dBV (.32 VRMS); Output impedance 100 Ω Ethernet RJ-45 on back of unit (PPA T45NET and PPA T45 NET D) supports CAT5e cable lengths up to 328 feet (100 meters); 10/100 Base-T IEEE 802.3 compliant, unique MAC address. Cat5e sheilded cable must be used to meet FCC requirements. Dante RJ-45 on back of unit (PPA T45 NET D only) supports CAT5e cable lengths up to 328 feet (100 meters); 10/100 Base-T IEEE 802.3 compliant, unique MAC address. Cat5e sheilded cable must be used to meet FCC requirements. Dimensions (H x W x D) 1.72" (43.69 mm) x 8.45" (214.63 mm) x 8.25" (209.55 mm) Weight 3.0 lbs (1.36 kg) - Documents
Documents
- In The Box
In The Box
- (1) PPA T45NET D Transmitter
- (1) ANT 025 Antenna
- (1) TFP 048 Power Supply
- (1) WLC 004 Main Power Cord (U.S.)
- (1) WCA 013 RCA Audio Cable, 3ft
- Reviews
Write Your Own Review