Skip to main content

Yamaha XP7000 2-Channel Power Amplifier (Discontinued)

Part #:
XP7000
Model #:
XP7000
Availability: No Longer Available
Contact us for comparable solutions.
Certified Audio
Expertise
FREE Custom
System Design
Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112

Get a Quote, Price or Support Fast!

We want to make contacting us as fast and as easy as possible. Please reach out if you have any questions or concerns about our products, system design, technical support, or orders.
Phone Monday - Friday
8:00 AM - 5:00 PM
1-888-256-4112
Email Contact us by email or
our simple form.
SEND EMAIL

The Yamaha XP7000 Power Amplifier delivers unmatched quality and value for installation applications.

Description

The Yamaha XP series offers five power amplifier models that deliver unmatched quality and value for installations. These power amplifier feature high power, outstanding sound quality, extended reliability, and superior stability for a wide range of installed sound systems as well as portable live sound applications.

Features

  • 700 Watts per Channel @ 8 Ohms, 20Hz-20kHz
  • High sound quality equivalent to upper-class models and emphasizing on superior sound
  • A design that ensures high sound quality and efficiency down to the finest details for full achievement of both high-definition sound and superior value
  • Yamaha's exclusive state-of-the-art high-efficiency amplifier driving technology EEEngine installed
  • A gain switch that can be changed to +4dBu / 26dB / 32dB has been installed on the rear panel for compatibility with a wide variety of input levels
  • Light weight and compact design of 2U size for installation in any location
  • Monitor and remote terminals for monitoring and control from a remote location
  • High-accuracy 1dB-step detented attenuator
  • Various terminals and features suitable for professional use
  • Special high-pass filter that enables change of cut-off frequency
  • Equipped with various protection circuits, indicators and stepless low-noise fans
  • Stereo Mode: for driving 2-channel sources independently
  • Parallel Mode: for driving monaural sources using 2 channels
  • Bridged Mode: for high-powered driving of 2 internal amplifiers as a single monaural amplifier
  • Best matches with the digital mixing engine DME64N/24N and Installation series speakers

Specifications

Output Power, 8Ω 700W+700W
S/N Ratio, 20Hz-20kHz 104dB
Idle Power Consumption 35 Watts
1/8 Power Consumption 650 Watts (4Ω/Pink Noise)
Power Bandwidth 10Hz - 40kHz (Half Power THD+N=0.5%)
THD+N 20Hz 0.1% 20kHz, Half Power
Intermodulation Distortion 0.1% 60Hz: 7kHz, 4:1, Half Power
Frequency Response 0dB RL=8Ω, Po=1W, HPF=OFF
Channel Separation, Half Power 70dB RL=8Ω 1kHz, ATT. Max input 600Ω shunt
Residual Noise -70dBu Att. min, 20Hz-20kHz (DIN AUDIO)
Damping Factor, 8Ω, f=1kHz More than 350
Voltage Gain, ATT. Max 32dB or 26dB or +4dBu input sensitivity by select switch
Maximum Input Voltage +22dBu
Controls, Front panel Power switch (push on/push off), attenuator (31 position) x 2
Controls, Rear panel Mode switch (Stereo/Bridge/Parallel) x 1, HPF switch x 2, Gain Select switch x 1
Connectors, Input XLR-3-31 type/ch, Euroblock connector (balance)/ch
Connectors, Output Speakon/ch, 5 way binding post x 1
Connectors, Monitor/Remote Dsub15P x 1
Indicators Power/Standby x 1 (Green/Orange), Signal x 2 (Green), Clip/Limit x 2 (Red)
Load Protection Power switch on/off mute, DC-fault: power supply shutdown/do not return automatically
Amplifier Protection Thermal (Mute the output; heatsink temp ≥ 90°C; Operation not restored automatically), VI limiter (Limit the output, RL ≤ 1ohm)
Power Supply Protection Thermal (Amplifier shuts down automatically; heatsink temp ≥ 100°C)
Power Requirements UC: 120V/60Hz, EU: 230V/50Hz, A: 240V/50Hz
Dimensions (H x W x D) 3.44" (88 mm) x 18.88" (480 mm) x 17.94" (456 mm)
Weight 30.9 Ibs (14 kg)

DOCUMENTS

My Cart